April 18, 2005
Park Pro 20 4WD
13-6244-11
PARK
PARK PRO 20 4WD
• Two cylinders Briggs & Stratton Vanguard OHV engine, 20 hp.
• 14 litre transparent petrol tank for long work.
• Automatic hydrostatic transmission for front and rear axle.
• Total freedom - choose any path you like on the lawn.
• Gentle to the turf, leaves no marks.
• Front mounted cutting deck gives better overview and easier
availability.
• Rear casing can be folded up, for easy access to the motor, bat-
tery and petrol tank.
• Height adjustable steering wheel with servo assistance which
makes steering extra easy.
• Adjustable comfort seat with armrest and extra high back.
• Hydraulic attachment lift.
• Cutting deck are easily angled into a cleaning position without
removing the belt.
• Electric attachment clutch and electric cutting height adjustment
handled from the right side of the driver’s seat.
• Hour meter to help you to remember to give service in right
time.
Park Pro 20 4WD (13-6244-11)
MOTOR
Brand Briggs & Stratton Vanguard
Power 20 hp
Cylinders 2 cyl
FUEL
Type of fuel Petrol
Tank volume 14 l
SPEED CONTROL
Type of transmission 4WD Pro
Number of gears Speed gear 0-11 km/h + R
STEERING
Type of steering Genuine articulated steering
Servo assisted steering Hydraulic
Adjustable steering wheel Yes
Articulated steering through chain/chain Yes
WHEELS
Type of wheels Stiga special lawn tyre tread
Wheel size 17 inches
Tyre pressure Front 0,6bar. Rear 0,4bar
Driving Four wheel drive
Snow chains Accessory
CUTTING SYSTEM
Type of cutting system Front cutting deck
Cutting width 107, 121 or 125 cm
Cutting height adjustment Electric with 107M HD El, 121M El and 125 Combi Pro El
CONTROLS
Cruise control Yes
Deck connection Quick coupling
Deck lift Hydraulic
Electric starter Yes
Head light Yes
Hour meter Yes
Gear lever Foot pedal
COLOUR & MATERIAL
Colour Yellow / Grey
Material of chassis Steel
MEASURES & WEIGHT
Weight 240 kg
Package size WxHxL 95x100x205 cm
Largest measures WxHxL 135x125x255 cm
SEAT
Type of seat Comfort seat with extra high back support and arm rests
Seat adjustable horizontally Yes
OTHER FACTS
CE-mark Yes
Instructions for use 8211-0540-01
EAN bar code 731 332130 301 3
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Snapper Conquest 2700 User manual
-
Snapper 1695588 User manual
-
Briggs & Stratton 2609772 User manual
-
Simplicity 2690364 User manual
-
Simplicity LANDLORD / 1700 / 2700 SERIES CE User manual
-
Castelgarden XK 140 HD Installation guide
-
-
-
-