WAP Settings for using the EBGD67 on
O
2
GSM Services
I
n order to access WAP facilities you must first make sure that you have your SIM data
enabled and subscribe to a WAP Service, with your airtime provider. Their telephone
number will be on your phone bill. The above settings are necessary to use WAP
services via O
2
.
Step-by-step guide to configure WAP on your GD67
1. Press the navi-key in to get into the main menu, and then scroll left to Browser. Then
press the navi-key to select.
2. Scroll down to Browser Setting and press the navi-key to select.
3. Scroll down to Server Setting and press the navi-key to select.
4. Highlight either 1 or 2 and press the navi-key. Select Edit and press the navi-key.
5. Highlight Name and select Edit by pressing the navi-key type o2 then select Menu
by pressing the navi-key and select OK.
6. Scroll down to Home URL and press the navi-key to Edit.
7. Enter http:// wap.o2.co.uk (all lower case) then select Menu by pressing the navi-
key and then OK.
To select special characters, hold down 1 and select the : and / characters from the
list . To select numbers, switch from abc to 0-9 mode using the Phonebook button at
the top left corner of the keypad.
8. Scroll down to Port Number press the navi-key to Edit. Enter 9201and select Menu
by pressing the navi-key to select OK.
9. Scroll down to Gateway IP and press the navi-key to select Edit..
10. Enter 193.113.200.195 select Menu by pressing the navi-key select OK
11. Scroll down to Service Choice press the navi-key to select, highlight GSM Only
pressing the navi-key to select.
12. Scroll down to GSM and press the navi-key to select.
13. Press the navi-key to select Circuit Type , Highlight Digital Only and press the
navi-key.
14. Scrol down to Digital Dial # and press the navi-key to select
15. Enter +447712927927 then select Menu by pressing the navi-key and select OK.
16. Scroll down to PPP ID press the navi-key to select Edit
17. Enter o2wap (all lower case). Select Menu by pressing the navi-key, select OK.
18. Scroll down to PPP Password press the navi-key to select Edit.
19. Enter password (all lower case). Select Menu by pressing the navi-key then select
OK.
20. Press the top right hand button twice to return to the WAP service Menu and
highlight o2.
21. Press the navi-key and select Set.
22. Press the top right hand key and select Start Browser. Press the navi-key
23. A prompt will appear “Circuit is down. Start data Call?” Press the navi-key to
select Yes.
Profile Name
O2
Home URL
http://wap.o2.co.uk
Port Number
9201
Gateway IP
193.113.200.195
Service Choice
GSM Only
Circuit Type
Digital Dial
Digital Dial #
+447712927927
User ID
o2wap
Password
password
Authentication
Normal
-
1
