FRAM 1085936468 User manual

I've reviewed the installation instructions for the EXTRA GUARD Rigid Panel Air Filter. This document includes clear steps for removing the old filter, cleaning the housing, and installing the new filter with proper sealing. It also specifies vehicle compatibility for Honda Civic models between 2016 and 2022 with a 2.0L engine. I'm here to answer any questions you might have about the product and the installation process.
What should be used to clean the filter cover and housing?

What is the first step of installation?

For what vehicle models this filter is designed for?

EXTRA GUARD Rigid Panel Air Filter

Installation Instructions

1. Use proper protective gear.

2. Loosen wing nut or other fasteners to remove filter cover.

3. Remove old air filter.

4. Clean filter cover and housing using a shop vacuum.

5. Install new air filter. Be sure it is sealed around the perimeter.

6. Replace cover and fasten.

1. Follow recommended change intervals as noted in your vehicle owner’s manual

2. vs. average of leading standard retail brands. Based on FRAM Group testing of filter

efficiency of models CA4309, 8755A, 326, 6479, and their standard retail brand equivalents

under ISO5011

APPLICATIONS WHERE USED

Make

Model

Year

Engine/Submodel

HONDA

CIVIC

2016-2022

L4 2.0L

Naturally

Aspirated