EXTRA GUARD Rigid Panel Air Filter
Installation Instructions
1. Use proper protective gear.
2. Loosen wing nut or other fasteners to remove filter cover.
3. Remove old air filter.
4. Clean filter cover and housing using a shop vacuum.
5. Install new air filter. Be sure it is sealed around the perimeter.
6. Replace cover and fasten.
1. Follow recommended change intervals as noted in your vehicle owner’s manual
2. vs. average of leading standard retail brands. Based on FRAM Group testing of filter
efficiency of models CA4309, 8755A, 326, 6479, and their standard retail brand equivalents
under ISO5011
APPLICATIONS WHERE USED