2. dams
  3. TY-B2L
TY-B2L

dams TY-B2L User manual

  • Hello! I've analyzed the assembly instructions for the Dams Meeting Booth models including TY-B2L, TY-B4L, TY-B2H, and TY-B4H. This document provides a step-by-step guide to assemble the booth using included parts and fittings. I'm ready to answer any questions you might have about the assembly process, components, or any other aspect mentioned in the instructions.
  • What tools are required for assembly?
    What is included in Pack 1?
    What is included in Pack 2?
    What is included in Pack 3?
ASSEMBLY
INSTRUCTIONS
Tilly
Meeting Booths
1
2 3 456
7 8 9 10 11 12
Pack 1:
2x Sofa Units
1
2
3456
7 8 9 10 11 12
Pack 2:
1x Linking Panel
06-01-2022
Tilly - Meeting Booth
TY-B2L - TY-B4L - TY-B2H - TY-B4H
1 2
3
456
7 8 9 10 11 12
Pack 3:
1x Top Pack &
Fitting Kit
1,2,3...
**mm
TOOLS REQUIRED
FOR ASSEMBLY
DONT STRUGGLE
2 MAN LIFT
ALWAYS HANDLE
ITEMS WITH CARE
IF UNSURE CALL
FOR ASSISTANCE
**mm
KEEP FITTINGS AWAY
FROM CHILDREN
4
Please check that you have all the parts
1 2 3 456
7 8 9 10 11 12
PACK 1:
2 x Sofas
Connector Bolt - M6
Size PCS
50mm 4
30mm 4
Connector Bolt - M6
Size PCS
20mm 8
FITTINGS SUPPLIED
Please check that you have all the ttings
Top Fixing Bracket
Size PCS
120 x 120mm 2
1100 x 700mm = TY-LBS1
1700 x 700mm = TY-LBS2
1100 x 700mm = TY-HBS1
1700 x 700mm = TY-HBS2
1 2 3 456
7 8 9 10 11 12
PACK 2:
1 x Link Panel
1100 x 1100mm = TY-JPL
1100 x 1450mm = TY-JPH
PACK 3:
1 x Top Pack & Fitting Kit
600 x 700mm = TY-B2-DESK
1200 x 700mm = TY-B4-DESK
1 2 3 456
7 8 9 10 11 12
Link Fixing Bracket
Size PCS
120 x 30mm 2
Locate and attach the leg aligning
the holes located as shown using
the M6 x 20mm bolts.
TILLY MEETING BOOTH ASSEMBLY
1
Step 1
2
Step 2
Unpack your new Tilly booth
seating unit and please recycle
all packaging.
3
Step 3
Locate the brackets to the xing
holes and attach using the M6 x
20mm bolts as shown.
4
Step 4
5
6
Step 6
Attach the M6 x 50mm bolts as
shown to secure the frame to the
top.
Locate the brackets to the xing
holes and attach using the M6 x
20mm bolts as shown.
Step 5
Attach the M6 x 50mm bolts as
shown to secure the frame to the
top.
/