Hillsdale Furniture Pierce Metal Desk Owner's manual

Type
Owner's manual
page 1
Contact Hillsdale Furniture for parts / 502-562-0000 / https://hillsdalefurniture.com/Main/Home/ContactUs
LOT NUMBER: DATE PURCHASED: / /
Made in China
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recomended to ensure that all
components are in proper position, tight and free from damage. THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READS AND KEEP FOR FUTURE REFERENCE. Adult assembly is required.
Version 1.0 ; Date : 02-23-2023
Mainstays Side Storage Desk
2079382640
3114084726
1248095673
For immediate help with assembly or product information
call our toll-free number:
1-800-243-9758
Mon - Fri 9:00 am to 5:00 pm Eastern Time
INTERACTIVE ASSEMBLY INSTRUCTIONS
page 2
Version 1.0 ; Date : 02-23-2023
Contact Hillsdale Furniture for parts / 502-562-0000 / https://hillsdalefurniture.com/Main/Home/ContactUs
DANGER
Risk of suffocation! •
Keep any packaging materials away from children.
Before Getting Started
• Read the instructions carefully prior to
assembling the product.
• Carefully remove all packaging materials and
retain for future use.
• Choose a clean, level, spacious assembly area.
Avoid hard surfaces that may damage the
product.
• Ensure that you have all required contents for
complete assembly.
• Take care when lifting. Assemble the product in
close proximity to where you intend to position
the item.
• Do not over tighten the screws and bolts and
be careful using power tools as they may
damage the threads.
sure it is stable before use.
• Please do not completely tighten bolts and/or
screws until assembly is finished.
Cleaning & Maintenance
• Keep the product away from direct heat and
sunlight.
• Prolonged exposure to heat sources may
cause glazing, melting and scorching, or even
cause color to fade.
• Regular vacuuming or light brushing helps to
remove dirt and prevent soil build-up, which
increases the appearance wear.
• Periodically (every 90 days) make sure that the
screws are fully tightened.
Metal Furniture Care Instructions
• For everyday cleaning, chrome, brass,
aluminum, and painted metal surfaces can be
kept looking their best by wiping with a slightly
damp, soft cotton cloth,or vacuum cleaner
brush.
• If soiled, wipe with clean sponge or cloth wrung
out of water. Wipe dry with cloth or paper towel
to avoid water spots.
• Do not use any harsh abrasives or chemicals to
clean any metal surfaces as it may damage the
protective coating.
product is exposed to excessive humidity,
particularly in salt water locations.
• Liquid spills should be removed immediately.
Using a soft clean cloth, blot the spill gently.
Avoid rubbing.
Part List
A 1
B1
C 1
D 2
E 1
F 1
G 1
CONTENTS
Before getting started, ensure the package
contains the following components:
PARTS
page 3
Top Panel
Up Shelf
Down Shelf
Up Front Supporting Tube
Left Front Leg
Left Back Leg
Right Back Leg
ABC
DE
F
G
Top Panel Up Shelf Down Shelf
Up Front Supporting Tube Left Front Leg Left Back Leg
Right Back Leg
Contact Hillsdale Furniture for parts / 502-562-0000 / https://hillsdalefurniture.com/Main/Home/ContactUs Version 1.0 ; Date : 02-23-2023
I
Up Rear Supporting Tube
H
Right Front Leg
J
Left Bottom Supporting Tube
K
Right Bottom Supporting Tube
L
Bracket
M
Metal Wire
H1
I 1
J 1
K 1
L 2
M 2
Right Front Leg
Up Rear Supporting Tube
Left Bottom Supporting Tube
Right Bottom Supporting Tube
Bracket
Metal Wire
HARDWARE
3.5m / 12"
DO NOT USE POWER TOOLS TO ASSEMBLE THIS PRODUCT. USE OF POWER TOOLS WILL INVALIDATE ANY CLAIM AND MAY
DAMAGE THIS PRODUCT MAKING IT UNSAFE.
TOOLS REQUIRED FOR ASSEMBLY (NOT INCLUDED)
page 4
1. M6 x 40mm 2. M4 x 26mm
10 x 4 x
3. M4 x 12mm
10 x
4. M4.2 x 40mm
1 x
Contact Hillsdale Furniture for parts / 502-562-0000 / https://hillsdalefurniture.com/Main/Home/ContactUs Version 1.0 ; Date : 02-23-2023
5. M4 x 15mm
3 x
6. M4 x 15mm
3 x
STEP 2
Assembly
STEP 1
page 5
1
x 4
M6 x 40mm
2
x 2
M4 x 26mm
3
x 2
M4 x 12mm
Contact Hillsdale Furniture for parts / 502-562-0000 / https://hillsdalefurniture.com/Main/Home/ContactUs Version 1.0 ; Date : 02-23-2023
Install parts , , and by using screws 1F
The second step is to join the structure in the first step to Part , using screws and
A23
D
F
G
I
F
A
D
G
A
D
F
G
GDI
Contact Hillsdale Furniture for parts / 502-562-0000 / https://hillsdalefurniture.com/Main/Home/ContactUs Version 1.0 ; Date : 02-23-2023
DE
H
1
x 2
M6 x 40mm
2
x 2
M4 x 26mm
3
x 2
M4 x 12mm
E
H
AEH
A
STEP 4
Assembly
STEP 3
G
Install parts , and by using screws 1
HDE
In this step is to join the structure in the step three to Part , using screws and
A23
page 6
Assembly
STEP 5
page 7
Contact Hillsdale Furniture for parts / 502-562-0000 / https://hillsdalefurniture.com/Main/Home/ContactUs Version 1.0 ; Date : 02-23-2023
Installing the part to part and , using screw
K
K
G
H
K
G
H
1
x 2
M6 x 40mm
GH1
Assembly
STEP 6
page 8
Contact Hillsdale Furniture for parts / 502-562-0000 / https://hillsdalefurniture.com/Main/Home/ContactUs Version 1.0 ; Date : 02-23-2023
1
x 2
M6 x 40mm
E
J
J
L
L
L
L
L
E
F
F
F
In this step, the installation of part To Part and
is mounted together with Part using screws 1
JE F
L
Assembly
STEP 7
page 9
Contact Hillsdale Furniture for parts / 502-562-0000 / https://hillsdalefurniture.com/Main/Home/ContactUs Version 1.0 ; Date : 02-23-2023
E
C
L
L
LE
C
3
x 6
M4 x 12mm
B
B
F
Installing Part and part , it is necessary to lay the structure as in the diagram.
Attach Part and part to the structure with screws
Screw from the bottom as shown in the diagram.
1
BC
BC
Assembly
STEP 8
page 10
Contact Hillsdale Furniture for parts / 502-562-0000 / https://hillsdalefurniture.com/Main/Home/ContactUs Version 1.0 ; Date : 02-23-2023
I
4
x 1
M4.2 x 40mm
To keep the middle shelf stable, screw part together. Using screws 4
I
Assembly
STEP 9
page 11
Contact Hillsdale Furniture for parts / 502-562-0000 / https://hillsdalefurniture.com/Main/Home/ContactUs Version 1.0 ; Date : 02-23-2023
F
M
M
M
G
G
M4 x 15mm
5
x 2
6
x 2
M4 x 15mm
To keep this table solid, part is fixed at both side of the leg with screw
and tightening head
5
M
6
Assembly
STEP 10
page 12
Contact Hillsdale Furniture for parts / 502-562-0000 / https://hillsdalefurniture.com/Main/Home/ContactUs Version 1.0 ; Date : 02-23-2023
M4 x 15mm
5
x 1
6
x 1
M4 x 15mm
M
F
M
M
I
For the final step, lock the both parts in the middle
of Part by using screws and tightening head
M
I56
I
Assembly
STEP 11
page 13
Contact Hillsdale Furniture for parts / 502-562-0000 / https://hillsdalefurniture.com/Main/Home/ContactUs Version 1.0 ; Date : 02-23-2023
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13

Hillsdale Furniture Pierce Metal Desk Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI