estimated
assembly time
20 : 00
people required
2 or more
MH-TB-837, 21063, 21064
1
Ok, let’s
get started!
Put on mood music!
To prevent damage to product, use the clean side of
package carton or rug as working surface.
In the event of missing or damaged parts, delivery
problems etc., please reach out to our team.
We will be happy to x the problem!
2
care guide
Clean regularly with a soft and dry cloth.
To protect nish, avoid use of abrasive cleaners.
Wipe up spills immediately. Please!
While assembling the product,
tighten the bolts up to 50%. Once
all parts are in place, only then
fully tighten the bolts.
3
A
Tabletop
x1
B
Metal Legs
x4
product
parts
4
(E) - Flat Washer
x16
(C) - Bolt
x16
(D) - Allen Key
x1
what’s
included
5
assembly
instructions
Friendly Tip: Take a deep
breath going in. This may be a
tricky part, but nothing too
overwhelming. Just follow
these steps to the T and the
outcome will be
worth it!
6
While assembling the product, tighten the bolts up to 50%.
Once all parts are in place, only then fully tighten the bolts.
step 1:
step 2:
7
First, turn the tabletop (A) upside-down. Align any leg (B) with the
space in tabletop (A) taking this image as reference
To attach leg (B) to the tabletop (A), use washer (E) and bolt (C).
C
B
E
Tighten bolt (C) using the allen-key (D). Repeat steps 1, 2, and 3 till
all four legs (B) are xed in place.
Once all legs are attached, ip the table back.
step 3:
step 4:
8
D
9
Voila! Your table is now assembled and secure!
/
