Specifications
110/66 Punch Down Installation Tool for
Cat6a/Cat6/Cat5e/Cat5 Network Cable
MODEL NUMBER: N046-000
Description
Tripp Lite's professional grade, high-volume Punch Down Cable Installation Tool, with adjustable impact,
is the perfect multi-purpose tool for punching down Cat5/Cat6 cable to 110 jacks and patch panels, or,
telephone wire to 66M blocks. Each blade (110 or 66) contains a cutting and non-cutting side. The blade
not being used is stored in the handle compartment. Adjustable High/Low actuation setting
accommodates termination requirements or installer preference.
Features
Professional, Installer Grade 110/66 Impact Punch Down Tool
●
Both blades (110 & 66) have cutting and non-cutting sides
●
Handle compartment for storing blade not in use
●
Adjustable impact preference
●
Rugged, Polyacetal Resin frame for long-life use
●
Highlights
Professional-Grade Impact
Punch Down Installation Tool
with 110 & 66 Blades
●
Package Includes
Impact Punch Down Tool
●
110 Punch Down Blade
●
66 Punch Down Blade
●
OVERVIEW
UPC Code 037332143679
Accessory Type Tool
Technology Cat5/5e; Cat6; Cat6a
PHYSICAL
Shipping Dimensions (hwd / in.) 9.90 x 7.30 x 1.20
Shipping Dimensions (hwd / cm) 25.15 x 18.54 x 3.05
Shipping Weight (lbs.) 0.40
1 / 2
Downloaded from Arrow.com.
© 2022 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
https://www.tripplite.com/products/product-certification-agencies
Shipping Weight (kg) 0.18
WARRANTY
Product Warranty Period
(Worldwide) 3-year limited warranty
2 / 2
Downloaded from Arrow.com.Downloaded from Arrow.com.
/