ASOKO SOKO-D Operating instructions

Brand: ASOKO

Model: SOKO-D

Type: Operating instructions

ASOKO SOKO-D is a versatile and convenient under-cabinet light with a built-in motion sensor, allowing for hands-free illumination. Featuring five adjustable color temperatures from warm to cool white, it can be easily recharged via USB-C and features a long-lasting battery. The magnetic backing and included 3M adhesive tape make installation a breeze.

Installation diagram

1.Wipe the installation area clean

3.Tear the 3M adhesive paper

4.Install it where you need it

Company sales service: [email protected]

Store link: https://www.amazon.com/asoko

Under Cabinet Lighting

SOKO-D Instruction

Cautions:

Who We Are:

1.Motion sensor: The motion sensor

device of the light may be aﬀected by

changes in the external environment.

Do NOT use it in any environment with

strong electromagnetic interference.

2.Working mode: The light will auto ill-

uminate for 30s when someone walks

by then get out in dark, the sensing dist-

ance is 10ft and range of 120° in auto

mode.

3.Rechargeable: With fast-charging

USB-C port, the light can be fully char-

ged in 3 to 4 hours. Please use the cable

in the package for charging, and do NOT

use the light when charging to avoid any

damage to the light.

4.Battery: Batteries included.

Do not throw the product into the ﬁre,

or exposed to the sun. Do not use it if

any leaking liquid found. Do not throw

it into water.

5.Recommended environment: Rec-

ommended use temperature is 14-122℉,

do NOT use the lights in a humid or high-

temperature environment to avoid

short-circuiting.

Back to 2017, two young girls wanted

buy a cabinet light can be easily inst-

alled but failed. They decided to design

one, then ASOKO established.

As a young brand, we embrace the con-

cept of good design should never be

complicated.

No matter who you are, you can always

ﬁnd a led light in ASOKO to light up your

home in a simple way.

Life should be more simple with more

happiness.

2.3M tape is ﬁxed to a piece of steel and

adsorbs to the lamp built-in magnet.

(Magnets are installed at both ends of the lamp.)

Product Structure:

Caution:

Installation instruction video:



A. The 3M sticker is disposable , can not

be peeled oﬀ to reuse.

B. The 3M sticker cannot used to stuck

on rough walls, such as brick walls, lime

wallls, patterned wallpaper,etc. Recom-

mended to use on smooth surfaces such

as tiles,wood panels,etc.

C. To avoid falling,pls wait for 8 hrs to let

the 3M tape to stick stable, then install

the light bar.

1. Recharging: Use the cable in package

to charging with the USB-C port.

2. ON/OFF/AUTO: Push the toggle switch

on the side of light bar to choose the mode.

The light will stay on 2 seconds then goes

oﬀ to show it is in AUTO mode.

3. Dimmable & 5 Colors: After turn light on,

just tap the touch sensor to choose light

colors, long press to dim.



Warning:

2700K/3200K/4000K/

5000K/6500K

Product speciﬁcation:













SOKO-D

100lm

300 cycles(Battery)

FCC

120° + 10ft



SOKO-D



 PC+ABS

 500mA

SOKO-D 9.4inch/240mm:

   

 

This device complies with Part 15 of

the FCC Rules. Operation is subject to

the following two conditions:

(1) this device may not cause harmful

interference, and

(2) this device must accept any interf-

erence received, including interference

that may cause undesired operation.

ON/OFF/AUTO

Light panel

USB-C port

Magnetic

PIR sensor Touch Sensor

HONGKONG YEEZEN LIGHTING CO.,LIMITED

RM18 27/F HO KING COMM CTR 2-16

FAYUEN ST MONGKOK KL

ing co.,ltd

Company sales service:

[email protected]

ASOKO SOKO-D Operating instructions

ASOKO SOKO-D Operating instructions

ASOKO SOKO-D Operating instructions

Other documents