EPH Controls A17 User manual

A17
Brand
EPH Controls
Model
A17
Type
User manual

EPH Controls A17 is a 1-zone timeswitch designed for indoor use, offering precise ON/OFF control for various electrical devices. With its versatile mounting options, it can be directly wall-mounted or fitted into a recessed conduit box. The built-in frost protection feature adds functionality, preventing damage caused by freezing temperatures.

EPH Controls A17 is a 1-zone timeswitch designed for indoor use, offering precise ON/OFF control for various electrical devices. With its versatile mounting options, it can be directly wall-mounted or fitted into a recessed conduit box. The built-in frost protection feature adds functionality, preventing damage caused by freezing temperatures.

For use in normal environments.
A17 - 1 Zone Timeswitch Installation Instructions
Page 1 of 2
EPH Controls Ireland
sales@ephcontrols.com www.ephcontrols.com
EPH Controls UK
sales@ephcontrols.co.uk www.ephcontrols.co.uk
Before commencing any work on the electrical connections, you must rst disconnect the timeswitch
from the mains. None of the 230V connections must be live until the installation has been completed
and the housing is closed. Only qualied electricians or authorised service sta are permitted to open
the timeswitch. Disconnect from mains supply in the event of any damage to any buttons.
There are parts that carry mains voltage behind the cover. The timeswitch must not be left unsupervised
when open. (Prevent non specialists and especially children from gaining access to it.)
If the timeswitch is used in a way not specied by the manufacturer, its safety may be impaired.
Prior to setting the timeswitch, it is neccessary to complete all required settings described in this section.
Never remove this product from the electrical baseplate. Do not use sharp tools to push any button.
CAUTION! Installation and connection should only be carried out by a qualied
person and in accordance with national wiring regulations.
20180528_A17_InsIns_JW
Type
EN60730
1C IP20
EN60529
55
°C
0
131
°F
32
5-95%RH
This timeswitch can be mounted in the following ways: 1. Directly wall mounted 2. Mounted to a recessed conduit box
This timeswitch is designed to provide ON/OFF
control for 1 zone, with the value added application
of in built frost protection.
Important: Keep this document
1
34
5 6
2
140
99
https://manual-hub.com/
EPH Controls Ireland
sales@ephcontrols.com www.ephcontrols.com
EPH Controls UK
sales@ephcontrols.co.uk www.ephcontrols.co.uk
For use in normal environments.
A17 - 1 Zone Timeswitch Installation Instructions
Page 2 of 2
20180528_A17_InsIns_JW
1. Factory default settings
Contacts: Volt free contact
Program: 5/2D
Backlight: On
Keypad: Unlocked
Clock type: 24 Hr Clock
Day-Light Saving
Power Supply: 230 Vac, 50-60 Hz, 8 VA
Ambient Temp: 0~35°C
Contact Rating: 250 Vac 3(1)A
Program Memory
backup: 3 months
Battery: 3Vdc CR2032
Backlight: Blue
IP rating: IP20
Backplate: British System Standard
Pollution degree: 2
Rated Impulse Voltage: 2,500V as per EN 60730
Automatic Action: Type 1.C
Software: Class A
Ball Pressure Test Temperature: 70˚C
2. Specications & wiring
200-240Vac
50Hz-60Hz CONTACT RATING: 250Vac~/3(1)A
If mains voltage output is required, terminals L & 1 must be electrically
linked. The cable link is provided with this timeswitch.
Contents
1. Factory default settings
2. Specications & wiring
OFFCOM ON
https://manual-hub.com/
  • Page 1 1
  • Page 2 2

EPH Controls A17 User manual

A17
Brand
EPH Controls
Model
A17
Type
User manual

EPH Controls A17 is a 1-zone timeswitch designed for indoor use, offering precise ON/OFF control for various electrical devices. With its versatile mounting options, it can be directly wall-mounted or fitted into a recessed conduit box. The built-in frost protection feature adds functionality, preventing damage caused by freezing temperatures.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents