2. MODULAR LIGHTING INSTRUMENTS
  3. TETRIX
TETRIX

MODULAR LIGHTING INSTRUMENTS TETRIX Operating instructions

  • Hello! I've reviewed the installation instructions for the Light Frame TETRIX Round 74. This document provides detailed guidance on how to install and uninstall the frame, along with important safety information regarding LED handling and electrostatic discharge. I'm ready to answer any questions you might have regarding the installation process or safety recommendations.
  • What can happen if I touch the LED light source?
    Who should replace the light source?
    How can I prevent electrostatic damage?
1
2
3
For latest version of driver matrix and available accessories check
www.supermodular.com or connect with your sales contact.
DRIVERS & ACCESSORIES
PREVENTING ELECTROSTATIC DAMAGE
A discharge of static electricity may damage sensitive components.
Always be properly grounded when touching leads or circuitry
inside the luminaire. Use a wrist strap connected by a ground cord
to the housing. Avoid touching the light sources with bare hands.
LIGHT SOURCE - DO NOT TOUCH LED
Touching the LED can result in permanent damage of the light
source.The light source contained in this luminaire shall only be
replaced by the manufacturer or his service agent or a similar
qualified person.
΀̐ؐ֐
03 - 16/06/2021
TETRIX Frame Round 74
135100XX
TETRIX LED-UNIT SHOULD BE ORDERED SEPERATELY
Ø68
200 x 200 mm
Min 20 mm
110 mm
Min 1mm
Ø68 mm
110 mm
INSTALL UNINSTALL
/