MechaTronix CoolStar 3445 Operating instructions

Brand
MechaTronix
Model
CoolStar 3445
Type
Operating instructions

MechaTronix CoolStar 3445 is a high-performance LED star cooler designed for use with Luminus Gen 3 and Gen 4 COB Arrays and Dynamic COB Warm Dimming Modules. It features a compact design (ø34.5 x H45 mm) and offers excellent thermal conductivity (Rth 8.13 °C/W) for efficient heat dissipation. The CoolStar 3445 is compatible with various mounting options, including Zhaga Book 11 LED holders, BJB spotlight connectors, Ideal Industries Chip-Lok™ holders, Bender+Wirth 434 Typ 2 holders, and direct mounting with 2 screws (M3 x 6mm).

MechaTronix CoolStar 3445 is a high-performance LED star cooler designed for use with Luminus Gen 3 and Gen 4 COB Arrays and Dynamic COB Warm Dimming Modules. It features a compact design (ø34.5 x H45 mm) and offers excellent thermal conductivity (Rth 8.13 °C/W) for efficient heat dissipation. The CoolStar 3445 is compatible with various mounting options, including Zhaga Book 11 LED holders, BJB spotlight connectors, Ideal Industries Chip-Lok™ holders, Bender+Wirth 434 Typ 2 holders, and direct mounting with 2 screws (M3 x 6mm).

No.818, Dashun 2nd Rd., Sanmin Dist., Kaohsiung City 80787, Taiwan
sales@mechatronix-asia.com www.led-heatsink.com www.mechatronix-asia.com
Tel: +886-7-381-5892 Fax: +886-7-383-9293 VAT: 28600841
CoolStar® 3445
ø34.5 x H45 (mm)
Rth 8.13 °C/W
Power Pd 6 W
CoolStar® 3445 Designer series Luminus LED Star Cooler ø34.5mm
Mounting indicator marks overview
MechaTronix recommends the use of a high
thermal conductive interface between the LED
module and the LED cooler. Either thermal grease,
a thermal pad or a phase change thermal pad
thickness 0.1-0.15mm is recommended. Thermal
pads or phase change thermal pads can be pre-
applied from MechaTronix.
Mounting Instructions
Patented, high performance Luminus LEDs are the brightest and most versatile
solid state light sources available today, redefining the solid state lighting landscape
by enabling the adoption of LED technology into emerging markets. Luminus
technology is used in commercial and industrial lighting fixtures, theatrical lighting,
projectors, signs, medical equipment, UV curing… just about anywhere a bright,
efficient, reliable, long-life light source is needed.
Model names
• CXM-3 (Pico-COB)
• CXM-4 (Pico-COB)
• CXM-6
• CIM-9
• CLM-9
Model names
• CXM-6 (AC)
• CIM-9 (AC)
• CLM-9 (AC)
Model names
• CDM-6
Luminus Gen 4 COB Array
Luminus Gen 3 COB Array
Luminus Dynamic COB Warm Dimming Modules
Mounting
• With Zhaga Book 11 LED holder
BJB spotlight connector 47.319.6060
BJB spotlight connector 47.360.1020
Ideal Industries Chip-Lok™ holder 50-2002P
Bender+Wirth 434 Typ 2
Mounting with 2 screws M3 x 6mm
Orange indicator marks
Mounting
• With Zhaga Book 11 LED holder
BJB spotlight connector 47.319.6060
BJB spotlight connector 47.360.1020
Ideal Industries Chip-Lok™ holder 50-2002P
Bender+Wirth 434 Typ 2
Mounting with 2 screws M3 x 6mm
Orange indicator marks
Mounting
• With Zhaga Book 11 LED holder
BJB spotlight connector 47.319.6380
Mounting with 2 screws M3 x 6mm
Orange indicator marks
  • Page 1 1

MechaTronix CoolStar 3445 Operating instructions

Brand
MechaTronix
Model
CoolStar 3445
Type
Operating instructions

MechaTronix CoolStar 3445 is a high-performance LED star cooler designed for use with Luminus Gen 3 and Gen 4 COB Arrays and Dynamic COB Warm Dimming Modules. It features a compact design (ø34.5 x H45 mm) and offers excellent thermal conductivity (Rth 8.13 °C/W) for efficient heat dissipation. The CoolStar 3445 is compatible with various mounting options, including Zhaga Book 11 LED holders, BJB spotlight connectors, Ideal Industries Chip-Lok™ holders, Bender+Wirth 434 Typ 2 holders, and direct mounting with 2 screws (M3 x 6mm).

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents