JANOME M770 Operating instructions

M770 Tools version 1.20 – with USB driver installer

Below is the M770 Tools which contains the USB driver installer for 32/64bit computers:

After clicking on the link below, you must click on either “download” or on the download arrow

in the upper right corner of the screen, it looks like this: (If you get a warning

from Microsoft that this may be a dangerous file, you can click Yes to continue and proceed to

the website since this is not a dangerous file)

https://drive.google.com/file/d/1RTzEvuhpWTXRa8yrldHl-AQNbQZ20-ic/view?usp=sharing

Unzip the file after it has downloaded.

Once you have downloaded the file, locate the setup icon double-click on it to install.

On your desktop, click on the M770Tools icon to open M770 Tools, the interface will

open as shown below.

To install the USB driver, please click on the USB Driver Installer as shown circled below and

follow the on-screen prompts to install the driver.

**Sometimes the firewall will block the installation of the USB driver, so if after you have

attempted to install the USB driver and the communication is still not working, try disabling the

firewall which may be managed in Control Panel>Security, or the antivirus software may

manage the firewall.