MODELS:
MBP27T,
MBP27T/2,
MBP27T/3,
MBP27T/4
QUICK START GUIDE
For a full explanation of all features and instructions, please refer to the User’s Guide.
1. Setting up your Digital Baby Monitor
Connect the small plug of
the power adapter to the
Baby Unit and the other end
to the electrical outlet.
Only use the enclosed
adapter (6V DC / 500mA).
A. Connecting power supply for the Baby Unit
Insert the wire tab of the
rechargeable battery pack
into the contact slot as
shown above and fit the
battery pack into the
compartment.
B. Installing the battery pack for the Parent Unit
Black
Red
Small cross head or
Flat end screwdriver.
C. Fastening the cover for the Parent Unit
Connect the small plug of
the power adapter to the
Parent Unit and the other
end to the electrical outlet.
Only use the enclosed
adapter (6V DC / 500mA).
D. Connecting power supply for the Parent Unit
POWER
WARNING:
STRANGULATION HAZARD - Keep the Unit and adapter cord more than 3 feet from the crib and out of reach.
NEVER place camera or cords within the crib.
Never use extension cords with AC Adapters. Only use the AC Adapters provided.
2. Basic operation of the keys
3. General Information
If your product is not working properly...
1. Read this Quick Start Guide or the User’s Guide.
2. Contact Customer Service:
Parent Unit
P
Power ON/OFF button
Press and hold to turn the unit ON/OFF.
Press to turn the display ON/OFF.
UP/VOL+ buttons
Press to increase sound volume. Press to move up menu options/settings.
Press to move up in digital pan/tilt mode.
DOWN/VOL- buttons
Press to decrease sound volume. Press to move down menu options/settings.
Press to move down in digital pan/tilt mode.
MENU/OK button
Press to open menu options.
Press to confirm a selection.
Press to pan right in digital pan/tilt mode.
Return/Switch Camera button
Press to return to previous menu level.
Press to switch camera units. (If paired with more than one camera)
Press to pan left in digital pan/tilt mode.
Digital Pan/Tilt button Press to enter/exit digital pan/tilt mode.
TALK button Press and hold to speak to your baby.
Surface temperature mode Press and hold to measure the liquid surface temperature.
Forehead temperature mode Press and hold to measure the baby body temperature.
Baby Unit
ON/OFF switch Slide the power switch down to switch on the Unit. Slide the power switch up to switch off the Unit.
US and Canada 1-888-331-3383
Email: motoro[email protected]om
V
>
<
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this
product. MOTOROLA and the Stylized M Logo, are trademarks or registered trademarks of Motorola
Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their
respective owners.
© 2013 Motorola Mobility LLC. All rights reserved.
Printed in China
Version 7.0
-
1
-
2
Motorola MBP27T/3 Quick start guide
- Category
- Baby video monitors
- Type
- Quick start guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Motorola MBP27T User manual
-
-
-
-
-
-
Motorola FOCUS360 Quick start guide
-
-
-
Motorola MBP26 User manual