Comtrend PG-9172 User guide

Category
PowerLine network adapters
Type
User guide

Comtrend PG-9172 is a G.hn Powerline Adapter Kit that allows you to create a wired network using your home's electrical wiring. This can be useful for extending your network to areas where Wi-Fi is not available or unreliable, or for creating a more secure network connection.

The PG-9172 is a plug-and-play device, so it's easy to set up. Simply plug the adapters into power outlets and connect them to your network devices with Ethernet cables. The adapters will automatically connect to each other and create a secure network connection.

The PG-9172 supports speeds of up to 1 Gbps, so you can enjoy fast and reliable network speeds even in areas with weak Wi-Fi signals. The adapters also have built-in power saving features to help reduce your energy consumption.

Comtrend PG-9172 is a G.hn Powerline Adapter Kit that allows you to create a wired network using your home's electrical wiring. This can be useful for extending your network to areas where Wi-Fi is not available or unreliable, or for creating a more secure network connection.

The PG-9172 is a plug-and-play device, so it's easy to set up. Simply plug the adapters into power outlets and connect them to your network devices with Ethernet cables. The adapters will automatically connect to each other and create a secure network connection.

The PG-9172 supports speeds of up to 1 Gbps, so you can enjoy fast and reliable network speeds even in areas with weak Wi-Fi signals. The adapters also have built-in power saving features to help reduce your energy consumption.

Page 1
Quick Install Guide
PG-9172 Kit| G.hn Powerline Adapter Kit
Understanding the Powerline Adapter
Initial Device Setup
NOTE: A minimum of two
G.hn Powerline Adapters are required to create a proper connection. Follow Steps
1-4 to add additional G.hn Adapters to your network.
1. Plug the Powerline Adapter into the power outlet.
Note: For maximum performance, please plug the Powerline Adapter directly into the wall outlet. Do not plug
into a power strip or surge protector, as network performance could degrade significantly.
2. Connect the Powerline Adapter to a network device with an Ethernet (RJ-45) cable. (Wait 10 seconds for
Network Indicator to light up GREEN which indicates a good connection, a flashing GREEN light indicates that
the device is sending data).
A
B
Connection Indicator
Network Indicator
Security Indicator
Displays Connection Strength
Displays Network Status
Connection is Secure When Lit
Network Device
(Modem, Router, or Access Point)
Ethernet Cable
Ethernet Port
(Enables Device Synchronization)
Power Saving Button
*
Press for 10 seconds for Factory Reset.
Page 2
Device Connection
3. Plug the additional Powerline Adapter into a power outlet near the Internet-enabled device (ex. TV, PC,
STB, DVR, etc.).
4. Connect the Powerline Adapter to the device with an Ethernet cable. (The Connection Indicators and
Network Indicators
on the front of both Powerline Adapters should be GREEN representing a strong
connection).
Security Setup
Note: G.hn Adapters will automatically connect in “non-secure” mode. It is highly recommended to
follow Steps 5 and 6 to create a secure connection.
5. Press the “Config” Button for 3 seconds till you see the Security Indicator start flashing GREEN on EACH
of the Powerline Adapters you want to be “connected.” (The Security Indicator will light up GREEN when
successfully connected AND the Connection Indicator on the front of the Powerline Adapter should be
solid GREEN when they are paired ~ representing a strong connection).
6. Repeat Steps 3 to 5 to add additional adapters/devices. Please note that up to 16 devices can be
connected to a Powerline G.hn Network.
Your device is now connected!
NOTE: For instructions on advanced features, FAQ, etc., please visit our online Product Webpage:
http://us.comtrend.com/products/public/product/home-networking/pg-9172.html
For more information: Facebook: https://facebook.com/Comtrend
Website: http://us.comtrend.com/
Support: Visit our website or call 1-877-COMTREND
(1-877-266-8736)
C
E
D
QR Code
  • Page 1 1
  • Page 2 2

Comtrend PG-9172 User guide

Category
PowerLine network adapters
Type
User guide

Comtrend PG-9172 is a G.hn Powerline Adapter Kit that allows you to create a wired network using your home's electrical wiring. This can be useful for extending your network to areas where Wi-Fi is not available or unreliable, or for creating a more secure network connection.

The PG-9172 is a plug-and-play device, so it's easy to set up. Simply plug the adapters into power outlets and connect them to your network devices with Ethernet cables. The adapters will automatically connect to each other and create a secure network connection.

The PG-9172 supports speeds of up to 1 Gbps, so you can enjoy fast and reliable network speeds even in areas with weak Wi-Fi signals. The adapters also have built-in power saving features to help reduce your energy consumption.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI