1.
2.
3.
4.
5.
3.1
Operation
Connect the appliance to the mains outlet. G
Press the On-/Off-button " " and all massage zones and the heat
function will be activated. G
Press the zone selection buttons repeatedly ( to ) according to
your personal preference to activate/deactivate the corresponding
massage for the selected zone. You may select only one zone or mul-
tiple zones for the massage. G
Press the button multiple times changes the massage intensity or de-
activates the massage zone: G
Weak massage intensity: The left LED over a zone selection button
lights up in green. G
Strong massage intensity: The right LED over a zone selection but-
ton lights up in green. G
Deactivated massage zone: None of the LEDs is alight. G
Massage mode selection: G
With the massage mode selector button you can choose one of 5
possible massage modes: G
1. Normal: G
Regular vibration massage with constant intensity and vibration fre-
quency. G
2. Pulsating: G
Pulse vibration massage, automatically changes the intensity and fre-
quency of the massage. G
3. Stream vibration massage: G
Automatically changes intensity and vibration frequency, feels like a
massage by "running water". G
4. Alternation mode A: G
Automatic alternation of massage zones in short intervals: G
Upper & Lower back vibration massage first, then automatically switch-
es to Thighs & Lower legs and so on.... G
5. Alternation mode B: G
Like alternation mode A, but alternates between massage zones Upper
back / Lower Legs and Lower back / Thighs. G
1
7 0
6
GB
3 Operating
17
6.
7.
The respective massage mode is indicated by the green LED lights
over the Massage mode selector button (The 1st LED for Mode 1,
the 2nd LED for Mode 2 and so on). G
Each time you change the massage mode, the massage intensity for
all massage zones will automatically be set to intensity 1 (weak inten-
sity). G
HEAT function button: G
Press this button at any massage mode to additionally switch on the
heating function. When the heating function is activated, the red LED
over the Heat function button will light up. The heating can only be
applied to the Lower back area. Press the heat function button again
to deactivate the Lower back heating. G
Press the On-/Off-button " " to switch off the appliance. The
appliance will switch off automatically after approx. 15 minutes of
continuous use. G
6
5
1