Vieta Home VH-HR065 User manual

Page is loading ...

INCIDENTS THAT ARE EXEMPT FROM GUARANTEE:

1. The guarantee period exceeds the stipulated time.

2. When the product has been handled by centres or personnel that are not authorised by VIETA AUDIO S.A.

3. When the product has been damaged by incorrect handling or use for purposes other than those it is intended

for and that are not contemplated in the user’s manual, or when it has broken pieces, scratches, cracks, wear and

tear, damage produced by particles of paint, sand, water or food within the unit..

4. This guarantee does not cover expenses or damages caused by transport.

5. Loss, robbery or accidents produced by ﬁre, liquid, chemical substances, excessive heat, inadequate

ventilation, vandalism, electrical storms, incorrect or excessive power supply, lightening, impact, other external

forces, radiation.

6. Any additional cost related to installing or uninstalling the product.

7. Products purchased outside Spanish territory or from distributors that are not authorised.

8. The data contained on our products (photo ﬁles, music, digital support, etc.) are not covered by the guarantee

under any circumstance; it is the client’s responsibility to make back-up ﬁles before giving us the product.

Likewise, any incorrect conﬁguration or installation of software or incompatibility issues with hardware

belonging to other equipment, including drivers and controllers.

9. Maintenance, repairs or parts replacement due to use and wear and tear.

10. Rechargeable and/or disposable batteries (life cycle depends on usage frequency).

11. Small faults or variations in the quality of the product that do not aect its value or the purpose for which it

was created.

12. Negligence.

13. Accessories:

 Plugs and cases.

 Connector cables.

 Headband.

 Eartip and sleeve kits.

 Decorative ﬁnishes.

14. Any issue detected on receipt of the goods must be notiﬁed to customer care 902.367.607 or sat@vieta.es.

In accordance with article 366 of trade law, VIETA AUDIO S.A. will not accept any claims regarding broken goods,

impacts or missing packages 24 hours after the goods have been delivered.

CUSTOMER CARE / Tel. +34 902 367 607 / Fax. +34 93 574 26 83 / www.vieta.es

TERMS OF GUARANTEE

VIETA AUDIO S.A. guarantees its products for a period of 24 months. The guarantee period starts on the date of

purchase of brand new products that have never been used by the ﬁrst end user.

This guarantee covers any possible manufacturing ﬂaws for any Vieta products sold on Spanish territory by

authorised distributors. Vieta products acquired in other countries will be covered by the guarantee supplied by

the local distributor.

This guarantee will only be valid when accompanied by an invoice for the product that includes the client’s

name, the distributor and the date of purchase. VIETA AUDIO S.A. agrees to repair any product with a problem

occurring during normal use as detailed in the user’s manual and when being used for the purpose for which it

was designed.

The guarantee will not be extended because a component is changed or the product is replaced.

ENGLISH

Contents

Safety precautions ......................................................................................20

Important information .................................................................................21

Connection to the mains .............................................................................22

Remote control

Installation of batteries .........................................................................23

Function .........................................................................................24 - 25

Front panel and connections ...................................................................... 26

Back panel and connections ......................................................................27

Audio connection with amplifier .................................................................28

Operation and functions

ON, OFF and Standby ..........................................................................29

Adjusting the antenna ..........................................................................29

RDS ......................................................................................................29

FM/AM ..................................................................................................30

Stereo/mono .........................................................................................30

Memory and preset ..............................................................................30

Auto (autotune) .....................................................................................31

Tuning ...................................................................................................31

Reset ....................................................................................................31

Troubleshooting ..........................................................................................32

Technical data.............................................................................................33

21

ENGLISH

20

Tuner FM/AM

IMPORTANT INFORMATION

Handling instructions

Protect the power cord

Positioning

Do not put your ngers or any other

objects into the unit

Interference

Condensation

SAFETY PRECAUTIONS

23

ENGLISH

22

Tuner FM/AM

CONNECTION TO THE MAINS

Connection to the Mains

REMOTE CONTROL

Installation of batteries

Using the remote control

220-240V AC~50Hz

Stere o Output

RL

FM ANTENNA AM

VH -H T0 10 BK /S L

20W

AC ~2 20- 240/ 50 Hz

AC ~2 20 -2 40 V/ 50H z

FU SE :T 0. 5A L 2 50 V

FM/AM

AUTOTUNE MEMORY - PRESET + RESET

ST/MONO

- TUNING +

POWER

ON OFF

VH-HT010 BK/SL

R. D. S

RADIO DATA SYSTEM

25

ENGLISH

24

Tuner FM/AM

FULL FUNCTION REMOTE CONTROL FOR VIETA

VH-CD030, VH-CD060, VH-HT010, VH-HR065, VH-HA050/075/100

VH-CD030/ VH-CD060/ VH-HT010/ VH-HR065/ VH-HA050/075/100

1 Power To set the unit(s) into standby and ON.

√

2 Eject Open and close the disc tray

√

× × ×

3 Number (0,1 – 10, + 10) a. Number buttons (0,1 ~ 10,+10): selects tracks on VH-CD030, VH-CD060.

b. Number buttons (0,1 ~ 10,+10): Save presets on VH-HT010 and VH-HR065.

Note: +10 key could be pressed by 10+(eg.10, press +10, button and

√

×

0 button; eg.15, press +10 one time and then 5 to select CD track or

tuner preset 15. eg. 25, by 2 times pressing +10 and then 5.

4 >> Fast forwards in CD playback; Manual tuning forward in tuner.

√

×

5 >II Play/Pause: Starts and pause playback.

√

×

√

×

6 >>I Skip (>>I) / Next: Selects the next track in CD, and the next preset in tuner.

√

×

7 I<< Skip (I<<) / Previous: Selects the last track in CD, and the last preset in tuner.

√

×

8 REPEAT Repeat a single or all tracks in CD disc or USB stick.

√

×

√

×

9 PRO/RDM PRO (Program) in CD060 only: Programming tracks on a CD in a particular order.

√

× × ×

RDM (Random) in CD030 only: All tracks are played in random order.

10 << Fast Rewinds in playback CD disc; Manual tuning backward in tuner.

√

×

11 TIME Press the key by times, shows (in CD disc)

- current track : elapsed time;

- total tracks: elapsed time of full disk;

√

× × × ×

- current track : remaining time

- total tracks : remaining time of full disc

12 STOP To stop playback in CD player.

√

×

√

×

13 CD/USB To select CD/USB source in amplifier or receiver;

√

× ×

√

Note: Press another time in CD030 to change CD or USB source.

14 DVD To select DVD source in amplifier or receiver. × × ×

√

15 TUNER To select Tuner source in amplifier or receiver. × ×

√

16 AUX To select AUX source in amplifier or receiver. × × ×

√

17 PHONO To select PHONO source in amplifier or receiver × × ×

√

18 LINE IN To select line-in source (3.5mm jack in front panel or back panel) × × ×

√

in amplifier or receiver.

19 SPKRS A Speaker selector, to choose pair-A speakers to listen; × × × ×

√

20 SPKRS B Speaker selector, to choose pair-B speakers to listen; × × × ×

√

21 MUTE To mute the sound in the amplifier or receiver. × × ×

√

22 VOLUME - To turn down the volume. × × ×

√

23 VOLUME + To turn up the volume. × × ×

√

24 FM/AM For tuner: To switch FM mode or AM mode. × ×

√

× ×

25 ST/MONO For tuner: To switch Stereo mode or Mono mode in tuner. × ×

√

×

26 AUTO For tuner: Auto scan the station(s) probably exits in tuner. × ×

√

×

27 MEMORY For tuner: To store the favorite station (as number buttons instruction). × ×

√

×

28 RDS For tuner: To activate the RDS information in the stations which available exists. × ×

√

× ×

27

ENGLISH

26

Tuner FM/AM

BACK PANEL AND CONNECTIONS

Connections

Explanation of VFD display

1. Stereo Output: Analogue stereo output. For connection to stereo amplifier or receiver with analogue input.

2. AC input: For connection of mains voltage. Make sure that the plug has been correctly inserted, and that the

voltage corresponds to the text printed on the back panel of the cabinet.

This unit does not feature any OSD (On Screen Display). Instead it features a more descriptive VFD display

that displays all the information required. Below you can see a picture of the display and an explanation of

the various symbols.

FRONT PANEL AND CONNECTIONS

Front panel

1. Mains switch: Used to turn ON/OFF the power.

2. LED: If press POWER button on remote control, it makes the tuner into Standby mode, and blue LED lights; you

need to press POWER button again to power on.

3. TUNING: For manual tuning, right tuning for high frequency, left tuning for lower frequency;

4. FM/AM: To switch FM or AM mode;

5. AUTOTUNE: Press it for scanning the exiting radio stations.

6. MEMORY: To save the tuned radio stations (together with number buttons on remote and PRESET buttons on

front panel).

7. PRESET- : To choose the previous stored station; and to save the tuned station as a new preset number;

8. PRESET- : To choose the next stored station; and to save the tuned station as a new preset number;.

9 ST/MONO: To switch the tuned FM station in stereo or mono mode;

10. RESET: Press it to clear all the stored stations.

Preset number

Frequency

KHZ is for AM frequency;

MHZ is for FM frequency;

12

FM /AM

AUTO TU NE ME MORY - P RESET + RESE T

ST /M ON O

- T UN IN G +

PO WE R

ON OF F

VH -H T0 10 BK /S L

R.D.S

RADIO DATA SYSTE M

4 7

5 89 10

3 6

1

2

Stereo Outpu t

RL

FM ANTENN A AM

VH -H T0 10 BK /S L

20 W

AC ~2 20- 240/ 50H z

AC ~2 20 -2 40 V/ 50 Hz

FU SE :T 0. 5A L 2 50 V

29

ENGLISH

28

Tuner FM/AM

-

+

-

+

LR

Stereo Outpu t

RL

FM

ANTENNA

AM

VH -H T0 10 BK /S L

20 W

AC ~2 20 -2 40/ 50H z

AC ~2 20 -2 40 V/ 50H z

FU SE :T 0. 5A L 2 50 V

VH-HA100BK

VH-HT010BK/SL

1

3

FM ANTENNA AM

VH -H T0 10 BK /S L

20 W

AC ~2 20- 240/ 50 Hz

AUDIO CONNECTION WITH AMPLIFIER

Audio connection

This page only contains suggestions for connection of your VH-HT010.

Note that the accessories in the pictures on this page are not included in the supply.

Analog amplifier/receiver

OPERATION AND FUNCTIONS

On, Off and standby

RDS

As it applies to all other radios, the sound quality

depends on the signal strength of the antenna position

and direction at the backpanel side.

The position of the radio in relation to the transmitter

thus directly influences the quality of the signal

received. For an optimal result it is therefore very

important that you make sure that the radio receives

the best possible antenna signal.

This tuner features RDS on the FM receiver. To

activate the informations, you can press RDS button

on the remote control, like Radio text, Station

frequency, Station type, Time and Date.

Note:

If the RDS button is pressed and no RDS information

displays, you need to check the strength of the signal

and adjust the antenna position and direction; or the

current station does not broadcast the information at

all.

Adjusting the antenna

1 Turn on and off the unit by pressing the mains switch.

2 Press the Power (standby) button on the remote

control to switch into

standby mode and power on again.

3 If you wish to turn off the unit to avoid any power

consumption, you must

press the mains switch.

3. Protect the environment and turn off the unit

after use.

Adjusting the antenna

RDS

31

ENGLISH

30

Tuner FM/AM

OPERATION AND FUNCTIONS

FM/AM

As this tuner can receive both normal FM radio and AM,

it features a function that can switc between the two

reception types. To switch between FM and AM, you

must either press the FM/AM button on the front panel

or the FM / AM button on the remote control.

Stereo/Mono

In some areas not all stations can be recieved noise

free, because it is not possible to get a strong enough

antenna signal.

In this case there will be a lot of noise on some

radio stations. It is possible to reduce the noise quite a

bit by listening to the radio station in mono in stead of in

stereo. This can make the radio station acceptable

to listen to. Change to mono by pressing the ST/MO

button on the remote or the ST/MONO button on the

front panel. To change back to stereo again, simply

press the button once again.

Note: there’s only MONO in AM mode.

MEMORY and PRESET

1. When you have found the station and want to save

a channel under one of the presets you must press the

button on the remote control with the desired number

0,1~ +10 on the remote control for 1 second.

Note:

+10 key could be pressed by 10+

e.g.10, press +10 button and 0 button;

eg.15, press +10 one time and then 5 to save as preset

15), eg. 25, by 2 times pressing +10 and then 5.

2. You can also save the tuned station by the buttons

in the front panel, firstly to press PRESET + or - , then

press MEMORY button.

AUTO (Autotune)

When the unit has been turned on, channels must be

saved. This is done by means of the autotune

function.

To use the autotune function through the front panel

controls, press the AUTO button. All available

channels on the current tuner band will be saved.

You can also press the AUTO button on the remote

control.

TUNING

When the unit is turned on for the first time, all settings will be default settings. The settings can be changed

according to your preference. When the unit is turned off the next time, these settings will naturally be saved

as the new default settings. This also applies if you unplug the unit.

RESET

This tuner can be reset. This is used to delete

channel stored in the unit.

Press the RESET button on the front panel to

reset the unit.

If you want to manual tune a channel, you must

press the

6

or

5

button on the remote control, or turn

the tuning knob on the front panel.

For every push on the button, the frequency will

change 0,05MHz on FM and 9 Khz on AM.

To store the manually tuned channel, simply press

the Memory button on the front panel or the Memo

button on the remote. The channel will then be stored

on the current preset.

FM/AM switch

Stereo/Mono switch

1. Memory with number bottons

and

6

or

5

on remote control;

2. Memory with PRESET +/- buttons

on the front panel.

Autotune, auto scan the stations

Manual tunning

Reset

33

ENGLISH

32

Tuner FM/AM

TECHNICAL DATA

Accesorios incluidos

1. 1pcs User manual;

2. 1pcs Power cord;

3. 1pcs Remote control;

4. 1pcs 2-RCA cable.

We reserve the right to change the technical data and the design of the product without notice as a result of

further development.

TECHNICAL DATA

RF section:

Tuner bands FM 87.5-108.0 MHz

AM 520-1710 KHz

Sensitivity FM 12 dBu @SN=20 dB

AM 55 dBu @SN=30 dB

Display: 1 line of 9 characters

VFD

Presets 40

Audio outputs Stereo 2.5 Vpp

Voltage 220-240 V

Power consumption 20 W

Dimensions (H x W x D): 50 x 430 x 290 mm

Weight 2.60 kg

TROUBLESHOOTING

PROBLEM CAUSE/REMEDY

No power when the unit is turned on. - In standby mode, you need to press TUNER

button in remote control to re-activate the tuner.

- Check that the plug has been correctly inserted

into the socket.

- The internal fuse has blown and must be replaced

     byaqualiedservicetechnician.

- The power cord has been damaged and must be

replaced.

No sound. - The unit has not been turned on.

     -Incorrectconnectiontotheamplier.

- No loudspeakers have been connected to

theamplier.

- The tuner has not found any stations.

The display does not show RDS - The tuner has not found any stations.

information. - The selected station does not broadcast

any information.

- The antenna signal is too poor. See the section

on adjusting the antenna.

Page is loading ...

Vieta Home VH-HR065 User manual

This manual is also suitable for

Vieta Home VH-HR065 User manual

in other languages

Related papers

Other documents