Sheet No. 1 of 1
Issue Date: Rev. 6-25-01
Litho in USA
Form No. 104916
Parts List &
Operating Instructions
for: 7180
SPX Corporation
655 Eisenhower Drive
Owatonna, MN 55060-0995 USA
Phone: (507) 455-7000
Tech. Serv.: (800) 533-6127
Fax: (800) 955-8329
Order Entry: (800) 533-6127
Fax: (800) 283-8665
International Sales: (507) 455-7290
Fax: (507) 455-7063
SPX Corporation- Fluid Power
5885 11th Street
Rockford, IL 61109-3699 USA
Phone: (815) 874-5556
Fax:(815)874-7853
Tech. Services: (800) 477-8326
Fax: (800) 765-8326
Order Entry: (800) 541-1418
Fax (800) 288-7031
Internet Address:
http://www.powerteam.com
Universal Bearing Cup Installer
Capacity: 3-5/8" O.D. – 6-1/2" O.D.
Item Part No.
No. No. Req'd Description
110213 1 Hex Nut (5/8-18)
2207561 1 Extension Spring
3210583 1 Expander
452038 3 Jaw
5305130 1 3 Way Head
6209624 3 Pin
7305129 1 Handle
8209963 1 Decal (not shown)
WARNING: Wear eye protection that meets the requirements of ANSI Z87.1 and OSHA.
BEARING CUP INSTALLATION
1. Turn the expander to the left or right to adjust the installer jaw diameter to the approximate same size
as the bearing cup inside diameter. See Figure 1 and 2.
2. Finger tighten the nut to prevent the expander from moving once the jaw diameter has been set.
3. Install the bearing cup. See Figure 3.
Deburr the edges of the installer jaws as needed by drawing a file across the shoulders as shown.
MAINTENANCE
-
1
