SMITH SYSTEM 55010 Assembly Instructions

Brand
SMITH SYSTEM
Model
55010
Type
Assembly Instructions

This manual is also suitable for

Assembly Instructions
Flowform Chair Caster Outriggers
If you have damaged or missing components,
please contact customer service at 1-800-328-1061
Document #: 179704 REVISED: 07/2022
Hardware and Components
Document #: 179704 REVISED: 07/2022
CHAIR CASTER OUTRIGGERS
QTY. 1 SET
T25 TORX BIT
QTY. 1
#10 X 1-1/4”TORX Flat
HEAD WOOD SCREW
QTY. 8
Special Notes:
•TOOLS REQUIRED:
•Drill w/ T25 Torx driver bit (bit provided)
•Check that all components are accounted for and undamaged before assembling.
•Please assemble the product in a clean and dry area.
•You may need another person to help assemble the product. Team lifting may be
required.
•Clean the product with a mild cleaner and a damp cloth.
•Replacement hardware listed on last page.
(PN: 60174)
Assembly Instructions
Document #: 179704 REVISED: 07/2022
1. Use a table to flip the chair onto the surface and push the back of the chair against
the edge of the table. Make sure that the table is sufficiently tall so that the back of
the chair does not touch the floor. The chair may be heavy; team lifting is
encouraged.
2. The eight marks in the middle of the underside of the chair are the screw positions
for the Caster Outriggers.
Caster Outrigger
Marks
Document #: 179704 REVISED: 07/2022
3. Position the Caster Outriggers so that the holes in the plate line up with the marks on
the underside of the chair. Make sure that you have about 1/8” of space between the
back of the chair and the casters so that the wheels do not rub on the fabric. Install
the eight #10 X 1-1/4” Torx Flat Head Wood Screws with the provided T25 Torx Bit to
secure the Caster Outriggers to the chair.
4. Flip unit over.
ASSEMBLY COMPLETE
Replacement Hardware
Document #: 179704 REVISED: 07/2022
T25 TORX BIT
QTY. 1
#10 X 1-1/4”TORX Flat
HEAD WOOD SCREW
QTY. 8
[REPLACEMENT HARDWARE PACK: 60175-R]
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

SMITH SYSTEM 55010 Assembly Instructions

Brand
SMITH SYSTEM
Model
55010
Type
Assembly Instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents