Magnescale LY72 Owner's manual

Brand
Magnescale
Model
LY72
Type
Owner's manual
Preset operation (LY72) 1/1
Ver.1 (2021.1) CS&S
Preset operation (LY72)
This describes a preset operation that sets an arbitrary value.
Up to 3 preset values can be saved.
Preset value 1
Preset value 2
Preset value 3
Preset number
Up to 3 preset values can be set for each axis
Axis label flashes The leftmost segment flashes
Enter the set value with the numerical keys and confirm the value with key.
Example: -15.0000
Makes the preset operation possible.
Press key. ( lamp lighting)
Press key for the axis you want to set.
The leftmost segment flashes.
If you have previously entered a preset value, that value will be displayed.
Setting preset values
Method 2 (input all numerical values)
Method 1 (simple input)
①
②
③
Up to 3 preset values can be set for each axis
You can enter the following preset values by pressing key on the axis you want to set and then pressing key.
Press key to end the preset operation. ( lamp off.）
Press key to confirm the preset value you entered.
If you have set preset values in the past, pressing key will display the preset values in sequence.
④
⑤
⑥
⑦
Recall preset values
If you have set preset values in the past, pressing key will display the preset values in sequence.
Makes the preset operation possible.
Press key. ( lamp lighting)
①
Press key for the axis you want to set.
The leftmost segment flashes.
If you have previously entered a preset value, that value will be displayed.
②
④
Press key to end the preset operation. ( lamp off.）
Press key to confirm the preset value you entered.
⑤
⑥
  • Page 1 1

Magnescale LY72 Owner's manual

Brand
Magnescale
Model
LY72
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents