ABB-1033
12VDC MOTOR BELL AND BOX
Potter Electric Signal Co., LLC • St. Louis, MO • Cust Service: 866-240-1870 • Tech Support: 866-956-1211 • Canada 888-882-1833 • www.pottersignal.com
MKT. #8850059 - REV B
1/10
PAGE 1 OF 1
PRINTED IN USA
• Low current motor driven bell (60mA at 12V DC)
• 2 reed tamper switches (PSW-1) for outer covers, inner
bafe plate, and back of box
• 12V DC operating voltage
• Durable, weather resistant powder coating paint
• Suitable for use with most control panels
• Evenly spaced louvers for a higher sound output
• Exterior color: Beige
Stock number - 4010009
10.83 (275)
10.83 (275)
3.75 (95) 7.56 (192)
Bell Box Dimensions: inches (mm)
The ABB-1033 box is constructed of steel with a durable beige powder coating nish to prevent corrosion. It operates on 12V DC and draws
a low 60mA. The ABB-1033 implements an exclusive low current patented motor driven bell mounted to a removable inner bafe plate and
generates a sound output of 85 dB at 10 ft. in the open eld. Two reed plunder switches (PSW-1) are designed into the bell box to provide
complete tamper protection.
Bell Dimensions: inches (mm)
Operating Voltage 8-17.5V DC
Rated Current at 12V DC 60mA
Sound Output dBA at 10 ft. 85dBA
Starting Voltage 8V DC
Tamper Switch Current 0.3A
Bell Gong Size 10 in.
Specications Bell Box Inside view