2. Roland
  3. ST-AX2

Roland ST-AX2 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Roland ST-AX2 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the main purpose of the Roland ST-AX2?
    Is it safe to modify or alter the Roland ST-AX2?
    How do I ensure the stability of the ST-AX2 when in use?
    What precautions should be taken when using the ST-AX2 in a household with young children?
    How should I clean the ST-AX2?
    What materials should be avoided when cleaning the ST-AX2?
Owner’s Manual for the AX-Edge or AX-Synth Dedicated Stand
Before using this product, carefully read this owner’s manual.
IMPORTANT NOTES
5 This product is a dedicated stand for the Roland AX-Edge or AX-Synth. Do not use this product for
other purposes.
5 Do not perform any modications on the product.
5 Before you use this stand, make sure that the stand’s legs are opened completely.
5 Make sure you always have the product placed so it is level and sure to remain stable. Never place it
on stands that could wobble, or on inclined surfaces.
5 In households with small children, an adult should provide supervision until the child is capable of
following all the rules essential for the safe operation of the product.
5 Protect the product from strong impact. (Do not drop it!)
5 Never climb on top of, nor place heavy objects on the product.
5 When folding or assembling this stand, take care not to pinch your hand or ngers.
5 For everyday cleaning wipe the product with a soft, dry cloth or one that has been slightly
dampened with water. To remove stubborn dirt, use a cloth impregnated with a mild,
non-abrasive detergent. Afterwards, be sure to wipe the product thoroughly with a soft,
dry cloth.
5 Never use benzine, thinners, alcohol or solvents of any kind, to avoid the possibility of discoloration
and/or deformation.
5 Depending on the material and temperature of the surface on which you place the stand, its rubber
feet may discolor or mar the surface. You can place a piece of felt or cloth under the rubber feet to
prevent this from happening. If you do so, please make sure that the product will not slip or move
accidentally.
5 When placing the AX-Edge or AX-Synth on this stand or removing the AX-Edge or AX-Synth from
this stand, take care that the cable or strap does not become tangled.
5 This document explains the specications of the product at the time that the document was issued.
For the latest information, refer to the Roland website.
© 2018 Roland Corporation
When using the stand, lower
the fall-prevention bar.
Placing the AX-Synth
Rubber pad
Place the AX-Synth so that its
rubber pad is between the
lower arms.
Placing the AX-Edge
Strap pin
Place the AX-Edge so that its
strap pin is between the lower
arms.
Placing the AX-Edge
Adjust the position of the
fall-prevention bar so that it
supports the lower part of the
AX-Edge as much as possible.
Placing the AX-Synth
Adjust the fall-prevention
bar so that it is between the
AX-Synth’s touch controller
and [OCTAVE/VARIATION]
button.
ST-AX2 01
English
/