Silicon Laboratories Radio User manual

Type
User manual

This manual is also suitable for

Silicon Laboratories Radio

Silicon Laboratories Radio is an easy-to-use USB device that allows you to listen to FM radio on your PC. With its simple setup and user-friendly interface, you can quickly enjoy your favorite radio stations. Here are some of the key features and capabilities of the Silicon Laboratories Radio:

  • Plug-and-play simplicity: Just connect the radio to a USB port on your PC and run the software to start listening.
  • Region-specific FM band configuration: You can specify your region to ensure that the radio tunes to the correct FM frequencies.
  • Preset station buttons: Save your favorite stations for easy access with the six preset buttons.

Silicon Laboratories Radio

Silicon Laboratories Radio is an easy-to-use USB device that allows you to listen to FM radio on your PC. With its simple setup and user-friendly interface, you can quickly enjoy your favorite radio stations. Here are some of the key features and capabilities of the Silicon Laboratories Radio:

  • Plug-and-play simplicity: Just connect the radio to a USB port on your PC and run the software to start listening.
  • Region-specific FM band configuration: You can specify your region to ensure that the radio tunes to the correct FM frequencies.
  • Preset station buttons: Save your favorite stations for easy access with the six preset buttons.
Rev. 1.0 11/05 Copyright © 2005 by Silicon Laboratories USB FM Radio-RD
USB FM Radio-RD
USB FM RADIO USERS GUID
E
1. USB FM Radio Setup
Follow the instructions listed below to set up and configure the USB FM Radio.
1. Download the USB FM Radio Player from the Silicon Laboratories website at www.silabs.com/usbradio.
2. Connect the USB FM Radio to an available USB Port on the PC.
3. Run the USB FM Radio Player.
4. The first time the Radio is connected, the USB FM Radio Setup Wizard shown in Figure 1 will appear.
5. Enter the correct location to specify the region-specific FM band.
6. Optionally, enter local radio station frequencies as Presets for the USB Radio player.
7. Press the Done button to configure the USB FM Radio Player.
8. The USB FM Radio Player will now connect to the USB FM Radio and will tune to the default radio station.
9. If configured, press one of the Station Preset buttons. Otherwise, press the Seek button to find a local radio
station.
Figure 1. Initial USB FM Radio Player Setup
One-time set-up enables
configuration of presets and
region specific FM band
USB FM Radio-RD
2 Rev. 1.0
2. USB FM Radio Player
Figure 2 shows each of the features of the USB FM Radio Player. Additionally, the player includes the following
features:
Press the desired Station Preset button until a beep is heard to set the button to the current station.
Press the Seek & Scan button until a beep is heard to begin a scan through all available stations.
Press the Preset Scan button to scan through the preset stations.
Press the Configuration Options button to open the Configuration Options window shown in Figure 3.
Press F1-F12 on the PC keyboard to select the corresponding Station Preset.
Press the left and right arrow buttons on the PC keyboard to perform seek and scan functions.
Press the up and down arrow buttons on the PC keyboard to perform tuning functions.
Hover the mouse over each button to display tooltips and programmed stations.
Right-click the Silicon Labs USB FM Radio icon in the systray menu to display a list of the station presets as
well as an alternative way to seek and tune the radio.
Figure 2. USB FM Radio Player
Links to Silicon
Laboratories Website
Station Presets
Signal Strength
Stereo/Mono
Control and
Display
Seek & Scan
Controls
RDS Station
Identifier
RDS Display Field
Tuning
Controls
Preset Scan
Configuration
Options
Volume Controls
USB FM Radio-RD
Rev. 1.0 3
Figure 3. Configuration Options
Station Presets
Version Info
Region Options
USB FM Radio-RD
4 Rev. 1.0
CONTACT INFORMATION
Silicon Laboratories Inc.
4635 Boston Lane
Austin, TX 78735
Internet: www.silabs.com
Silicon Laboratories and Silicon Labs are trademarks of Silicon Laboratories Inc.
Other products or brandnames mentioned herein are trademarks or registered trademarks of their respective holders.
The information in this document is believed to be accurate in all respects at the time of publication but is subject to change without notice.
Silicon Laboratories assumes no responsibility for errors and omissions, and disclaims responsibility for any consequences resulting from
the use of information included herein. Additionally, Silicon Laboratories assumes no responsibility for the functioning of undescribed features
or parameters. Silicon Laboratories reserves the right to make changes without further notice. Silicon Laboratories makes no warranty, rep-
resentation or guarantee regarding the suitability of its products for any particular purpose, nor does Silicon Laboratories assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation conse-
quential or incidental damages. Silicon Laboratories products are not designed, intended, or authorized for use in applications intended to
support or sustain life, or for any other application in which the failure of the Silicon Laboratories product could create a situation where per-
sonal injury or death may occur. Should Buyer purchase or use Silicon Laboratories products for any such unintended or unauthorized ap-
plication, Buyer shall indemnify and hold Silicon Laboratories harmless against all claims and damages.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Silicon Laboratories Radio User manual

Type
User manual
This manual is also suitable for

Silicon Laboratories Radio

Silicon Laboratories Radio is an easy-to-use USB device that allows you to listen to FM radio on your PC. With its simple setup and user-friendly interface, you can quickly enjoy your favorite radio stations. Here are some of the key features and capabilities of the Silicon Laboratories Radio:

  • Plug-and-play simplicity: Just connect the radio to a USB port on your PC and run the software to start listening.
  • Region-specific FM band configuration: You can specify your region to ensure that the radio tunes to the correct FM frequencies.
  • Preset station buttons: Save your favorite stations for easy access with the six preset buttons.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI