Aaeon GENE-LN05 Rev. B User manual

Category
Server barebones
Type
User manual

Aaeon GENE-LN05 Rev. B is a compact and versatile embedded board that packs a punch with its powerful Intel Atom™ N455/D525 processors, DDR3 memory support, and a range of connectivity options. Ideal for demanding applications, it features dual Gigabit Ethernet ports, multiple storage options including SATA and CompactFlash™, and a plethora of I/O ports including USB, COM, and parallel. The GENE-LN05 Rev. B also boasts a Mini Card slot for expansion and supports both CRT and LVDS displays, making it a great choice for a wide variety of embedded system projects.

Aaeon GENE-LN05 Rev. B is a compact and versatile embedded board that packs a punch with its powerful Intel Atom™ N455/D525 processors, DDR3 memory support, and a range of connectivity options. Ideal for demanding applications, it features dual Gigabit Ethernet ports, multiple storage options including SATA and CompactFlash™, and a plethora of I/O ports including USB, COM, and parallel. The GENE-LN05 Rev. B also boasts a Mini Card slot for expansion and supports both CRT and LVDS displays, making it a great choice for a wide variety of embedded system projects.

SubCompact Board GENE- LN05 Rev.B
GENE-LN05 Rev.B
Intel
®
AtomN455/D525 Processors
Intel
®
82567V & 82583V
for 10/100/1000Mbps
2 SATA 3.0 Gb/s, 1 CompactFlash
6 COM, 7 USB2.0, Digital I/O
1 Mini Card/ SMBus/ LPC
GENE-LN05 Rev.B Manual 4
th
Ed.
July 17, 2015
SubCompact Board GENE- LN05 Rev.B
Copyright Notice
This document is copyrighted, 2015. All rights are reserved. The
original manufacturer reserves the right to make improvements to the
products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the original
manufacturer assumes no responsibility for its use, or for any in-
fringements upon the rights of third parties that may result from its
use.
The material in this document is for product information only and is
subject to change without notice. While reasonable efforts have been
made in the preparation of this document to assure its accuracy,
AAEON assumes no liabilities resulting from errors or omissions in
this document, or from the use of the information contained herein.
AAEON reserves the right to make changes in the product design
without notice to its users.
i
SubCompact Board GENE- LN05 Rev.B
Acknowledgments
All other productsname or trademarks are properties of their
respective owners.
AMI is a trademark of American Megatrends Inc.
CompactFlashis a trademark of the Compact Flash
Association.
Intel
®
, Atom are trademarks of Intel
®
Corporation.
Microsoft Windows
®
is a registered trademark of Microsoft Corp.
ITE is a trademark of Integrated Technology Express, Inc.
IBM, PC/AT, PS/2, and VGA are trademarks of International
Business Machines Corporation.
SoundBlaster is a trademark of Creative Labs, Inc.
All other product names or trademarks are properties of their
respective owners.
ii
SubCompact Board GENE- LN05 Rev.B
Packing List
Before you begin installing your card, please make sure that the
following materials have been shipped:
CD-ROM for manual (in PDF format) and drivers
GENE-LN05 Rev.B with Active Cooler (D525 Version)
or with Passive Cooler (N455 Version)
If any of these items should be missing or damaged, please
contact your distributor or sales representative immediately.
iii
SubCompact Board GENE- LN05 Rev.B
Contents
Chapter 1 General Information
1.1 Introduction ................................................................ 1-2
1.2 Features .................................................................... 1-3
1.3 Specifications ............................................................ 1-4
Chapter 2 Quick Installation Guide
2.1 Safety Precautions .................................................... 2-2
2.2 Location of Connectors & Jumpers ........................... 2-3
2.3 Mechanical Drawing .................................................. 2-5
2.4 List of Jumpers .......................................................... 2-7
2.5 List of Connectors ..................................................... 2-8
2.6 Setting Jumpers ........................................................ 2-10
2.7 Touch Screen 4/5/8-wire Mode Selection (JP1) ....... 2-11
2.8 Auto Power Button Selection (JP2) ........................... 2-11
2.9 COM2 RI/+5V/+12V Selection (JP3) ......................... 2-11
2.10 Clear CMOS (JP4) .................................................. 2-11
2.11 LVDS Backlight Bias/PWM Mode Selection (JP5)2-11
2.12 LVDS Operating Voltage Selection (JP6) ............... 2-12
2.13 LVDS Inverter Voltage Selection (JP7) ................... 2-12
2.14 2-Pin ATX Power Connector (CN1) (Optional) ....... 2-12
2.15 CPU FAN Connector (CN2) .................................... 2-12
2.16 +5VSB Output With SMBUS (CN3) ........................ 2-12
2.17 External +5VSB Input (CN4) ................................... 2-13
iv
SubCompact Board GENE- LN05 Rev.B
2.18 SATA Port #2 (CN5) ................................................ 2-13
2.19 SATA Port #1 (CN6) ................................................ 2-13
2.20 LPC Expansion I/F (CN7) ........................................ 2-14
2.21 External +5V Input depends on the power input
configuration (CN8) ......................................................... 2-14
2.22 External +12V Input-depends on the power input
configuration (CN9) ......................................................... 2-14
2.23 Touch Screen Connector (CN10) ............................ 2-15
2.24 +5V Output For SATA HDD (CN11) ........................ 2-15
2.25 Front Panel (CN12) ................................................. 2-15
2.26 COM Port #6 (CN13) ............................................... 2-15
2.27 USB Port #7 (CN14) ................................................ 2-16
2.28 COM Port #5 (CN15) ............................................... 2-16
2.29 USB Port #6 (CN16) ................................................ 2-16
2.30 USB Port #5 (CN17) ................................................ 2-17
2.31 COM Port #4 (CN18) ............................................... 2-17
2.32 USB Port #4 (CN19) ................................................ 2-17
2.33 USB Port #3 (CN20) ................................................ 2-17
2.34 COM Port #3 (CN21) ............................................... 2-18
2.35 COM Port #2 (CN22) ............................................... 2-18
2.36 Audio Line-In/Out and MIC Connector (CN23) ....... 2-19
2.37 RJ-45 Ethernet #2 (CN24) ...................................... 2-19
2.38 RJ-45 Ethernet #1 (CN25) ...................................... 2-20
2.39 Digital I/O Connector (CN26) .................................. 2-20
2.40 Parallel Port (CN27) ................................................ 2-21
v
SubCompact Board GENE- LN05 Rev.B
2.41 LVDS Inverter Connector (CN28) ........................... 2-22
2.42 LVDS Output (CN29)............................................... 2-22
2.43 USB Port 1 & 2 (CN30) ........................................... 2-23
2.44 PS/2 Keyboard & Mouse (CN31) ............................ 2-23
2.45 COM Port #1 (CN32) ............................................... 2-23
2.46 CRT Display Connector (CN33) .............................. 2-23
2.47 SIM Card Socket (CN34) ........................................ 2-24
2.48 CompactFlash Disk (CFD1) .................................... 2-24
2.49 Mini-Card Slot #1 (PCIE1) ....................................... 2-25
2.50 DDR2 SODIMM Slot (DIMM1) ................................ 2-26
Chapter 3 AMI BIOS Setup
3.1 System Test and Initialization. .................................. 3-2
3.2 AMI BIOS Setup ........................................................ 3-3
Chapter 4 Driver Installation
4.1 Installation ................................................................. 4-3
Appendix A Programming The Watchdog Timer
A.1 Programming ......................................................... A-2
A.2 W83627DHG Watchdog Timer Initial Program ...... A-7
Appendix B I/O Information
B.1 I/O Address Map .................................................... B-2
B.2 1
st
MB Memory Address Map ................................ B-4
B.3 IRQ Mapping Chart ................................................ B-5
B.4 DMA Channel Assignments ................................... B-5
vi
SubCompact Board GENE- LN05 Rev.B
Appendix C Mating Connector
C.1 List of Mating Connectors and Cables.................. C-2
vii
SubCompact Board GENE- LN05 Rev.B
General
Information
Chapter
1
Chapter 1 General Information 1- 1
SubCompact Board GENE- LN05 Rev.B
1.1 Introduction
AAEON, a leading embedded boards manufacturer, is pleased to
announce a new 3.5” SubCompact BoardGENE-LN05 Rev.B. The
GENE-LN05 Rev.B is a cutting-edge product that provides high
performance and low power consumption in the embedded market.
GENE-LN05 Rev.B adopts the latest Intel
®
Atom processors and the
system memory is deployed with SODIMM DDR3 up to 4 GB (D525 is
up to 4 GB, N455 is up to 2 GB). In addition, Intel
®
82567V & 82583V
supports two 10/100/100Base-TX that allows faster network
connection. This model applies one Mini Card and one LPC Bus
expansions. Moreover, two SATA 3.0 Gb/s (optional RAID 0 &1) and
one Type2 CompactFlash
TM
storage is configured on the GENE-LN05
Rev.B. In addition to the diverse storages, GENE-LN05 Rev.B also
equips seven USB2.0, six COM, one parallel, and one
keyboard/mouse ports for flexible I/O expansions. There are no more
worries about installing many necessary devices to complete the
functions of your system.
The display of GENE-LN05 Rev.B supports CRT/LCD simultaneous/
dual view displays and 18/24-bit single channel LVDS. Moreover, the
GENE-LN05 Rev.B offers Wide Temperature Solution and the
temperature range will be -40
o
C~85
o
C. This SubCompact Board is
developed to cater to the requirements of Automation, Medical, ticket
machine, transportation, gaming, KIOSK, and POS/POI applications.
Chapter 1 General Information 1- 2
SubCompact Board GENE- LN05 Rev.B
1.2 Features
Intel
®
Atom N455/D525 Processors Up To 1.8 GHz
Intel
®
ICH8M
DDR3 800 SODIMM, Max. 4 GB for D525; Max. 2 GB
for N455
Gigabit Ethernet x 2
CRT, 18/24-bit Single Channel LVDS LCD
2CH HD Audio
SATA 3.0Gb/s x 2 (Optional RAID 0 & 1), CompactFlash™
x 1
USB 2.0 x 7, COM x 6, Parallel x 1, 8-bit Digital I/O
Onboard 4/5/8-wire Resistive Touch Screen Controller
Mini Card x 1
+12V or +5V (Optional) Operation
Onboard Trusted Platform Module (Optional)
Chapter 1 General Information
1 - 3
SubCompact Board GENE- LN05 Rev.B
1.3 Specifications
System
Processor Intel
®
AtomN455/D525 1.8GHz
Processors
System Memory 204-pin DDR3 800 SODIMM x 1, Max.
4 GB for Intel
®
AtomD525; Max. 2
GB for Intel
®
AtomN455
Chipset Intel
®
ICH8M
I/O Chipset Nuvoton W83627DHG-P, Fintek
F81216DG
Ethernet Intel
®
82567V & 82583V,
10/100/1000Base-TX, RJ-45 x 2
BIOS AMI Plug & Play SPI BIOS 2MB
Flash
Wake On LAN Yes
Watchdog Timer Generates a time-out system reset
H/W Monitor
Chipset
Supports power supply voltages and
temperature monitoring
Expansion Interface Mini Card x 1, LPC Bus
Trusted Platform
Module (TPM)
Infineon SLB 9635 TT 1.2 (Optional)
Battery Lithium battery
Power Requirement +12V or +5V (Optional), AT/ATX
Chapter 1 General Information 1- 4
SubCompact Board GENE- LN05 Rev.B
Board Size 5.75”(L) x 4”(W) (146mm x 101.6mm)
Gross Weight 0.88 lb (0.4 kg)
Operating
Temperature
32°F~ 140°F (0°C ~ 60°C)
WiTAS 1: -4°F~ 158°F (-20°C~70°C)
(TF-GENE-LN05W1-B10-01)
WiTAS 2 : -40°F~ 185°F (-40°C~85°C)
(TF-GENE-LN05W2-B10-01)
Storage
Temperature
-40˚F~ 176˚F (-40˚C ~ 80˚C)
Operating Humidity 0%~90% relative humidity,
non-condensing
Display: Supports CRT/LCD simultaneous/dual view displays
Chipset Intel
®
N455/D525 integrated
Memory Shared system memory up to 224
MB/ DVMT4.0
Resolution Up to 1920 x 1440 for CRT (D525)
Up to 1280x1024 for CRT (N455)
Up to 1366x768 or 1280 x 800 for
LCD
LCD Interface 18/24-bit single channel LVDS
I/O
Storage SATA 3.0 Gb/s x 2,
Type2 CompactFlash x 1
Serial Port Serial Port :RS-232 x 5,
Chapter 1 General Information
1 - 5
SubCompact Board GENE- LN05 Rev.B
RS-232/422/485 (auto flow) x 1
(AAEON recommends for the
Serial Port to be at the 9600 baud
rate during high temperature
operation.)
Parallel Port SPP/EPP/ECP x 1
USB Port USB2.0 x 7
PS/2 Port Keyboard x 1, Mouse x 1
Digital I/O Supports 8-bit (Programmable)
Audio Line-in, Line-out, Mic-in
Touch Screen Supports 4/5/8-wire resistive touch
screen
Note: For TF-GENE-LN05W2-B10-01, a thermal module for the DDR3
memory is recommended. We recommended using Fujipoly: SARCON
®
XR-L” (1.2 watt/m-K) or better thermal pad for the thermal module.
Note 2: According to Intel EDS documents, the chipset supports the 4 types of
DRAM as shown in the table below. Please choose your DRAM according to
the EDS document to avoid compatibility issues.
- DDR3 DRAM Device Technology:
Standard 1-Gb and 2-Gb technologies and addressing are supported for
x16/ x8 devices. There is no support for SODIMMs with different
technologies or capacities on opposite sides of the same SODIMM. If one
Chapter 1 General Information 1- 6
SubCompact Board GENE- LN05 Rev.B
side of a SODIMM is populated, the other side is either identical or empty.
- Supported DDR3 SODIMM module configurations.
Raw
Card
Type
DIMM
Capacity
DRAM
Device
Tech.
DRAM
Organization
# of
DRAM
Devices
# of
Ranks
Banks
A
1 GB
1 Gb
64 M x 16
8
2
A
2 GB
2 Gb
128 M x 16
8
2
B
1 GB
1 Gb
128 M x 8
8
1
B
2 GB
2 Gb
256 M x 8
8
1
Chapter 1 General Information
1 - 7
SubCompact Board GENE-LN05 Rev.B
Chapter 2 Quick Installation Guide 2-1
Quick
Inst
allation
Chapter
2
Guide
SubCompact Board GENE-LN05 Rev.B
Chapter 2 Quick Installation Guide 2-2
2.1 Safety Precautions
Always completely disconnect the power cord
from your board whenever you are working on
it. Do not make connections while the power is
on, because a sudden rush of power can
damage sensitive electronic components.
Always ground yourself to remove any static
charge before touching the board. Modern
electronic devices are very sensitive to static
electric charges. Use a grounding wrist strap at
all times. Place all electronic components on a
static-dissipative surface or in a static-shielded
bag when they are not in the chassis
SubCompact Board GENE-LN05 Rev.B
Chapter 2 Quick Installation Guide 2-3
2.2 Location of Connectors and Jumpers
Component Side
SubCompact Board GENE-LN05 Rev.B
Chapter 2 Quick Installation Guide 2-4
Solder Side
SubCompact Board GENE-LN05 Rev.B
Chapter 2 Quick Installation Guide 2-5
2.3 Mechanical Drawing
Component Side
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65

Aaeon GENE-LN05 Rev. B User manual

Category
Server barebones
Type
User manual

Aaeon GENE-LN05 Rev. B is a compact and versatile embedded board that packs a punch with its powerful Intel Atom™ N455/D525 processors, DDR3 memory support, and a range of connectivity options. Ideal for demanding applications, it features dual Gigabit Ethernet ports, multiple storage options including SATA and CompactFlash™, and a plethora of I/O ports including USB, COM, and parallel. The GENE-LN05 Rev. B also boasts a Mini Card slot for expansion and supports both CRT and LVDS displays, making it a great choice for a wide variety of embedded system projects.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI