2. Hanna Instruments
  3. HI70430

Hanna Instruments HI70430 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Hanna Instruments HI70430 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
PCA
REAGENT SET
Safety Data Sheets are available online: www.hannainst.com
ISTRPCA2 02/16
PCA
REAGENT SET
Safety Data Sheets are available online: www.hannainst.com
ISTRPCA2 02/16
PCA
REAGENT SET
Safety Data Sheets are available online: www.hannainst.com
ISTRPCA2 02/16
PCA
REAGENT SET
Safety Data Sheets are available online: www.hannainst.com
ISTRPCA2 02/16
Attention: The indicator reagent needs to be activated before use.
INDICATOR REAGENT
• Add the content of HI70430C-0 DPD reagent to the
bottle with the HI70430A Indicator Reagent.
• Replace the cap and shake gently the bottle for a
few minutes to make sure that the powder is
completely dissolved.
• The Indicator Reagent is now activated and ready to
be installed in the PCA (Process Color Analyzer).
BUFFER REAGENT
• Shake the HI70430B Buffer Reagent bottle well
before installing it in the Analyzer. Any residual
precipitate will not aect readings.
Attention: The indicator reagent needs to be activated before use.
INDICATOR REAGENT
• Add the content of HI70430C-0 DPD reagent to the
bottle with the HI70430A Indicator Reagent.
• Replace the cap and shake gently the bottle for a
few minutes to make sure that the powder is
completely dissolved.
• The Indicator Reagent is now activated and ready to
be installed in the PCA (Process Color Analyzer).
BUFFER REAGENT
• Shake the HI70430B Buffer Reagent bottle well
before installing it in the Analyzer. Any residual
precipitate will not aect readings.
Attention: The indicator reagent needs to be activated before use.
INDICATOR REAGENT
• Add the content of HI70430C-0 DPD reagent to the
bottle with the HI70430A Indicator Reagent.
• Replace the cap and shake gently the bottle for a
few minutes to make sure that the powder is
completely dissolved.
• The Indicator Reagent is now activated and ready to
be installed in the PCA (Process Color Analyzer).
BUFFER REAGENT
• Shake the HI70430B Buffer Reagent bottle well
before installing it in the Analyzer. Any residual
precipitate will not aect readings.
Attention: The indicator reagent needs to be activated before use.
INDICATOR REAGENT
• Add the content of HI70430C-0 DPD reagent to the
bottle with the HI70430A Indicator Reagent.
• Replace the cap and shake gently the bottle for a
few minutes to make sure that the powder is
completely dissolved.
• The Indicator Reagent is now activated and ready to
be installed in the PCA (Process Color Analyzer).
BUFFER REAGENT
• Shake the HI70430B Buffer Reagent bottle well
before installing it in the Analyzer. Any residual
precipitate will not aect readings.
Note: This instruction applies to the following reagent: HI70430.
Note: This instruction applies to the following reagent: HI70430.
Note: This instruction applies to the following reagent: HI70430. Note: This instruction applies to the following reagent: HI70430.
/