Acoustic Gadgets ClipSee Quick start guide

Brand
Acoustic Gadgets
Model
ClipSee
Type
Quick start guide

Acoustic Gadgets ClipSee lets you make and receive calls hands-free while driving. It's compatible with Apple iPhones running iOS 7.1 or earlier. To initiate a call, simply hold down the Home button to activate Siri and voice your command. To answer a call, slide your finger across the touch-sensitive surface. The ClipSee also features a speakerphone button and a mute button, which can be activated using the finger guides.

Acoustic Gadgets ClipSee lets you make and receive calls hands-free while driving. It's compatible with Apple iPhones running iOS 7.1 or earlier. To initiate a call, simply hold down the Home button to activate Siri and voice your command. To answer a call, slide your finger across the touch-sensitive surface. The ClipSee also features a speakerphone button and a mute button, which can be activated using the finger guides.

* The ClipSee™ supports call menus up to
Apple® iOS 7.1. Upgrades to versions
newer than 7.1 may impact finger guide
functionality.
Important Safety Information
• Please read the Quick Start Guide and
all safety information before using this
product.
• Be sure you understand and are
comfortable with call operations with
your phone in the ClipSee before using
it in driving situations.
• Check local laws regarding use of
ClipSee while driving and ensure your
attention and focus always remain on
driving safely.
See www.acousticgadgets.com for more
information about use and benefits of
ClipSee.
Limited Warranty
One-Year Limited Warranty. What is covered: Acoustic
Gadgets LLC warrants to the first retail purchaser of this
accessory that should this product or any part be proved
defective in materials or workmanship, from the date of
proof of purchase for a period of one (1) year, then it will
be subject to the terms of this one-year limited warranty.
Such defects will be repaired, replaced or credit issued at
Acoustic Gadgets LLC’s option, without charge for parts
or labor directly related to the defect. Limitations and
Exclusions: This warranty does not apply to any cost
incurred for removal or reinstallation, or to any product or
part thereof which has suffered through normal wear and
tear, alteration, improper installation, physical abuse,
misuse, neglect or accident. Nor does it cover defects
caused by shipment to an Acoustic Gadgets LLC service
center, or repair or service of the product by anyone other
than an Acoustic Gadgets LLC service center. Damage
resulting from an act of God, including but not limited to
fire, flood, earthquake and other natural disasters will be
excluded. This limited warranty is in lieu of all other
warranties, express or implied either in fact or by
operations of law, statutory or otherwise, including, but
not limited to any implied warranty of merchantability or
fitness for a particular use. Acoustic Gadgets LLC does
not authorize any other person to assume any liability
beyond the warranty herein described. In no event,
whether based in contract or tort shall Acoustic Gadgets
LLC be liable for incidental, inconsequential, indirect,
special or punitive damages of any kind from the use of
this product, including interrupted or incomplete phone
calls or arising out of any breach of this warranty. In no
event shall Acoustic Gadgets LLC be liable for damage in
excess of the purchase price. Other manufacturer
warranties may apply. Acoustic Gadgets, the AG Logo,
ClipSee, and the ClipSee Logo are trademarks of
Acoustic Gadgets in the U.S. and other countries. Apple
and iPhone are trademarks of Apple Inc., registered in the
U.S. and other countries.
©2014 Acoustic Gadgets LLC
QUICK
START
GUIDE
Preparing ClipSee For First Use
1. Place iPhone® or cased iPhone in the
ClipSee. Note: Some oversized cases
will not fit or work in the ClipSee; it is
recommended you use ClipSee only if
your cased iPhone can be easily
inserted and removed.
2. Adjust the elevation dial to center the
iPhone’s Home button.
3. Use the clip to attach ClipSee to your
shoulder belt. For best hearing and
voice transmission, position the ClipSee
directly below your mouth or slightly to
the left, which puts the iPhone’s top
microphone close to your mouth.
2. Activate the speaker button when the
In-Call menu appears (a few seconds
after placing/answering your call) by
using the left finger guide to find the
button – the inner rail for iPhone 4/4s,
and the outer rail for iPhone 5/5c/5s.
(You can use the right finger guide to
mute calls in the same manner).
Activate Speaker
Answer Calls
Making and Receiving Calls
If in compliance with the laws in your area
and in a safe driving situation, you may
initiate or answer calls as you normally
would without the ClipSee, then activate
the Speaker button and place iPhone in the
ClipSee to talk hands-free.
Optional: Making & Receiving
Calls using the ClipSee finger
guides (with Apple® iOS 7.1)*
1. With ClipSee attached to your shoulder
belt and your iPhone inserted, you can
initiate calls by holding down the Home
button to activate Siri®, and then voice
your command (e.g. “Call Dad”).
To answer calls, you can use the lower
finger guide to find the Slide to Answer
bar.
Initiate Calls
iPhone 4/4s
iPhone 5/5c/5s
Find Speaker
button using:
Mute
  • Page 1 1
  • Page 2 2

Acoustic Gadgets ClipSee Quick start guide

Brand
Acoustic Gadgets
Model
ClipSee
Type
Quick start guide

Acoustic Gadgets ClipSee lets you make and receive calls hands-free while driving. It's compatible with Apple iPhones running iOS 7.1 or earlier. To initiate a call, simply hold down the Home button to activate Siri and voice your command. To answer a call, slide your finger across the touch-sensitive surface. The ClipSee also features a speakerphone button and a mute button, which can be activated using the finger guides.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents