Page is loading ...
INSTRUCTION MANUAL
CaseScenario
™
for iPad
®
2
Product Diagram
What’s in the box?
Thank you for purchasing the USA Gear CaseScenario™ for iPad 2®.
This high quality, protective case and stand o ers a fully articulating and
folding design that adjusts angles to make both viewing and typing more
comfortable. Custom iPad 2 t provides easy access to all ports and buttons.
a - Folding cover
b - Hard-shell protective case
1 - Fastening pull tab
2 - Secured closure loop
3 - Non-slip friction pad
4 - Corner grips
5 - Case connector
6 – Connecting slot
a
b
1
2
3
4
5
6
Connecting the Hard-Shell Protective Case to the Folding Cover
Please locate the (5) Case connector in the center area on the back of the
(b) Hard-shell protective case. Slide the (5) Case connector into to the (6) Connecting
slot as shown below. The (b) Hard-shell protective case can also be used for stand-
alone iPad 2 protection when detached from the (a) Folding cover.
Attaching Your iPad 2 to the Hard-Shell Protective Case
Insert your iPad 2 into the (b) Hard-shell protective case using gentle downward
pressure. The (4) Corner grips hold securely so your iPad 2 will not slide out.
To remove the iPad 2, apply outward pressure while holding near the (4 ) Corner
grips.
Switching from Landscape to Portrait View
The CaseScenario for iPad 2 can be adjusted vertically, horizontally, and rotated
360
o
in order to make both viewing and typing more comfortable. Simply turn
the (b) Hard-shell protective case in a clockwise or counter-clockwise motion.
Adjusting CaseScenario for Easy Typing
The (a) Folding cover has a (3) Non-slip friction pad that stabilizes the iPad 2 while
inclined for easy typing. Place the (b) Hard-shell protective case at the angle that
best suits your needs.
Operating Instructions:
I cannot get the Hard-shell protective case out of the leatherized folding cover.
- Grip the (b) Hard-shell protective case by the spine and pull it away towards the
(3) Non-slip friction pad.
The Fastening pull tab is in the way of viewing my iPad 2.
- Just fold the (1) Fastening pull tab away and under the (a) Leatherized folding
cover, so it is no longer obstructing your view.
I’m having trouble getting my iPad 2 out of the Hard-shell protective case.
- Firmly hold your iPad 2 and use medium pressure to separate from the
(4) Corner Grips.
Troubleshooting
Troubleshooting
Product Speci cations
Made to hold your iPad2
Weight: 14 ounces (397 gm)
Dimensions: 10 x 8 x 1 inches (25.4 x 20.3 x 2.5 cm)
Additional accessories available for
purchase include a mounting system
for rear seat of car.
For more information please visit:
AccessoryPower.com/CaseScenario
- Please only use this product in the manner described in this manual.
Cautions
©
2011 ACCESSORY POWER
All trademarks and brand names are the property of their owners
iPad is a trademark of Apple Inc. registered in the U.S. and other countries.
Apple is not responsible for the operation of this device or its compliance
with safety and regulatory standards.
/