Box-Design Pre Box DS is a stereo line preamplifier with 4 line-level inputs. It features a pure single-ended Class-A output stage design, which effectively rejects vibration and electromagnetic noise. The preamplifier has a frequency response of 20Hz to 20kHz, a signal-to-noise ratio of -100dB, and a THD of 0.0035%. It also has a volume control with 64 steps of 1 dB each, and a relais-controlled input selection. The Pre Box DS comes with an IR remote control and trigger switching for power amplifiers.
Box-Design Pre Box DS is a stereo line preamplifier with 4 line-level inputs. It features a pure single-ended Class-A output stage design, which effectively rejects vibration and electromagnetic noise. The preamplifier has a frequency response of 20Hz to 20kHz, a signal-to-noise ratio of -100dB, and a THD of 0.0035%. It also has a volume control with 64 steps of 1 dB each, and a relais-controlled input selection. The Pre Box DS comes with an IR remote control and trigger switching for power amplifiers.
Box-Design Pre Box DS is a stereo line preamplifier with 4 line-level inputs. It features a pure single-ended Class-A output stage design, which effectively rejects vibration and electromagnetic noise. The preamplifier has a frequency response of 20Hz to 20kHz, a signal-to-noise ratio of -100dB, and a THD of 0.0035%. It also has a volume control with 64 steps of 1 dB each, and a relais-controlled input selection. The Pre Box DS comes with an IR remote control and trigger switching for power amplifiers.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI