2. Western
  3. Isolation Module Adapter Kit (Colorado/Canyon) #76947

Western Isolation Module Adapter Kit (Colorado/Canyon) #76947 Installation guide

  • Hello, I've reviewed the provided document for the 76947 Adapter Kit and understand it outlines installation steps. The instructions detail how to connect the adapter to the module's port B and then to the plug-in harness B connector, and also refer to lighting harness instructions. I'm ready to answer your questions about the installation procedure or the adapter itself.
  • What is the first step in the installation process?
    To which port of the module should the adapter be connected?
    Where should the other end of the adapter be connected?
Lit. No. 95089, Rev. 00 Printed in U.S.A. March 15, 2018
Lit. No. 95089, Rev. 00 Printed in U.S.A. March 15, 2018
76947 Adapter Kit
Installation Instructions
76947 Adapter Kit
Installation Instructions
Typical
Plug-In Harness
Typical Vehicle
Lighting Harness
3-Port Module
76947
Adapter
Typical
Plug-In Harness
Typical Vehicle
Lighting Harness
3-Port Module
76947
Adapter
76947 ADAPTER INSTALLATION
1. Install the plug-in lighting harness according to the
Installation Instructions supplied with the harness kit.
76947 ADAPTER INSTALLATION
1. Install the plug-in lighting harness according to the
Installation Instructions supplied with the harness kit.
2. Connect the adapter to port "B" of the module.
3. Connect the adapter to the plug-in harness "B"
connector as shown.
2. Connect the adapter to port "B" of the module.
3. Connect the adapter to the plug-in harness "B"
connector as shown.
/