2. Mircom
  3. BB-400 Plastic Surface Mount Back Boxes

Mircom BB-400 Plastic Surface Mount Back Boxes Owner's manual

  • Hello! I've reviewed the datasheet for the Mircom BB-400 series surface mount back boxes. These are designed for indoor use and come in red and white, suitable for the 400 Series LED Notification Appliances. They feature multiple conduit entries and a knockout. I'm ready to assist with any questions you may have regarding this product.
  • What are the back boxes designed for?
    What series of LED Notification Appliances are these back boxes compatible with?
    What colors are the back boxes available in?
PLASTIC SURFACE MOUNT BACK BOXES BB-400
Mircom reserves the right to make changes at any time without notice in prices, colours, materials, components, equipment, specications and models and also to discontinue models.
5278
NOT TO BE USED FOR INSTALLATION PURPOSES.
CATALOG NUMBER
Features
• Designed for indoor surface mount applications
• Compatible with Mircom 400 Series LED
Notication Appliances
• Red and white models
Description
Mircom’s BB-400 Series back boxes are designed
for indoor surface mount applications. Available
in red and white models, the BB-400 Series back
boxes are compatible with Mircom’s 400 Series LED
Notication Appliances. The durable plastic back
boxes come with conduit entries on all sides as well
as a knock-out at the back.
S5375 S5375
Dimensions
Knockout dimensions: 1 ⁄” (27 mm)
1 ⁄”
(46 mm)
4 ⁄” (123 mm)
4 ⁄”
(123 mm)
7135-1477:0500
7125-1477:0501
firealarmresources.com
Canada
25 Interchange Way
Vaughan, Ontario L4K 5W3
Telephone: (905) 660-4655
Fax: (905) 660-4113
Web page: http://www.mircom.com Email: [email protected]
Distributed by:
CAT. 5278
Rev. 0
NOT TO BE USED FOR INSTALLATION PURPOSES.
U.S.A.
4575 Witmer Industrial Estates
Niagara Falls, NY 14305
Toll Free: (888) 660-4655
Fax Toll Free: (888) 660-4113
Ordering Information
Model Number Description
BB-400R Surface Mount Back Box, Red
BB-400W Surface Mount Back Box, White
1 2 3
Attach the mounting plate to the mounting
box with the 4 screws.
Snap the unit on to the mounting
plate.
Secure the unit with the #4-40 x 3/8”
screw and snap the nameplate over
the screw.
Mounting
firealarmresources.com
/