Halcyon EX111 Dimmable LED Wall Light User manual

Hello! I've reviewed the installation instructions for the HALCYON LED Wall Light models EX111 1BB, EX111 1BCO and EX111 1BSS. The document explains how to properly install these dimmable lights, including the use of a 3M adhesive seal and silicone sealant. It also contains important safety information. I'm here to answer any questions you may have about the installation process, features or safety aspects described in the document.
What should I use between the installation surface and the base plate?

What should be covered in silicone sealant?

What may happen if the cable entry glands and screwheads are not covered?

2022/08

Take pride with installation.

Supplied adhesive 3M seal must be used between installation surface and base plate

Cable entry glands and screwheads must be covered in silicone sealant.

Failure to do so may cause luminaire failure from water ingress.

Colour

Bridgelux