16 44
Large 3 XL
4
1
2
3
1
2
3
#16521
Screw the leveling feet (C) into the bottom end of each pole.
3
Leveling Feet
4
5
4
Step 5 (optional)
Additional bins and bin dividers are available for purchase at:
www.sevilleclassics.com
Large Bins (WEBK400)
XL Bins (WEBK402)
Bin Dividers (WEBK401)
Step 4
Fasten slip sleeves (B) around the groove at the top of the
poles. Install the top shelf (D) over the top of the 4 poles.
Slide the bins (E) onto the shelves.
Step 3
Slide the shelf (D) over the top of the 4 poles until it rests
snugly over the sleeves. Repeat for 3 other shelves (D).
Tip: If necessary, use a rubber mallet to further secure the shelf.
Step 2
Starting at the bottom, fasten a pair of slip sleeves (B) around
the groove of each pole. If necessary, move the sleeves
slightly up or down until it “snaps” into place.
Step 1
Bin Dividers
( )( )
ASSEMBLY INSTRUCTION - 4-Tier Bin Rack
/
