2. Seville Classics
  3. SHE16521

Seville Classics SHE16521 Operating instructions

  • Hello! I've reviewed the assembly instructions for the Seville Classics 16521 4-Tier Bin Rack. This document details the step-by-step process for setting up the rack, including the installation of leveling feet, slip sleeves, shelves, and bins. I'm here to answer any questions you might have about this product or its assembly.
  • How many leveling feet are included?
    How many slip sleeves are included?
    How many shelves does the rack have?
16 44
Large 3 XL
4
1
2
3
1
2
3
#16521
Screw the leveling feet (C) into the bottom end of each pole.
3
Leveling Feet
4
5
4
Step 5 (optional)
Additional bins and bin dividers are available for purchase at:
www.sevilleclassics.com
Large Bins (WEBK400)
XL Bins (WEBK402)
Bin Dividers (WEBK401)
Step 4
Fasten slip sleeves (B) around the groove at the top of the
poles. Install the top shelf (D) over the top of the 4 poles.
Slide the bins (E) onto the shelves.
Step 3
Slide the shelf (D) over the top of the 4 poles until it rests
snugly over the sleeves. Repeat for 3 other shelves (D).
Tip: If necessary, use a rubber mallet to further secure the shelf.
Step 2
Starting at the bottom, fasten a pair of slip sleeves (B) around
the groove of each pole. If necessary, move the sleeves
slightly up or down until it “snaps” into place.
Step 1
Bin Dividers
( )( )
ASSEMBLY INSTRUCTION - 4-Tier Bin Rack
/