Clinton Electronics CE-UJB Installation guide

  • Hello! I've reviewed the Install Guide for the Clinton Electronics Universal Junction Box, designed for use with cameras like the Vandal X Dome and BZ Bullet series. This guide details the installation process, including mounting options, camera attachment, cable routing, and weatherproofing. I'm ready to answer your questions about the device and its installation.
  • What is the purpose of the Allen-head bolt on the side of the junction box?
    What is the minimum hole size to drill when mounting with the center hole?
    What type of screw should be used to attach camera to door?
    Why the rubber seal is important?
Begin by opening the door and firmly prying the door away from the junction box. The door will pop out of the
junction box hinge. If the door does not open, loosen the Allen-head bolt on the side of the junction box. Set the door
aside for now.
/