FAVI Pico+ J5-PICO-HD User manual
- Category
- Projectors
- Type
- User manual
FAVI J5-PICO-HD Projector
Touch Panel
Speaker
Focus
Lens
IR
Window
Right / Vol +
Return
OK / Menu
Up / Previous
Source
Left / Vol -
Down / Next
Micro SD
HDMI
Power
USB
VGA / AV
Headphone
DC In
Support Leg
Mounting Point
Projector Features
Connecting to Devices
1 Multimedia
2 Video Devices (AV)
3 HDMI Devices
4 PC / Laptop (VGA)
1. Insert Micro SD Card or USB into the correct slot on the
back of the projector.
2. Select the media type from the main menu.
3. Select a media file/folder from the Micro SD Card or USB.
1. Connect one end of the AV cable to the projector and the
other end to an AV device.
2. Press the Source button [ ] on the touch panel of the
projector or [ ] on the remote to select the AV channel.
Remote Overview
Projection Size (Reference Only)
www.favientertainment.com
Power
Return
Menu / Source
Select / OK
Volume Control
3D Function
Directional Keys
Mute
Home
Size (in)
20
40
50
60
80
100
120
16:9
1.74 - 1.81
3.48 - 3.61
4.36 - 4.49
5.22 - 5.41
6.96 - 7.22
8.69 - 9.02
10.6 - 11.0
4:3
1.87 - 2.00
3.81 - 3.93
4.79 - 4.92
5.74 - 5.94
7.64 - 7.91
9.55 - 9.88
11.5 - 11.8
Distance (ft)
Micro SD Card
USB
Camcorder
DVD Player
Game Console
Portable
Media Player
1. Connect one end of the HDMI cable to the projector and
the other end to a HDMI device.
2. Press the Source button [ ] on the touch panel of the
projector or [ ] on the remote to select the HDMI channel.
NOTE: Some laptops will automatically switch to HDMI, if it does not
press FN + MENU to switch.
1. Connect one end of the VGA cable to the projector and
the other end to a PC or laptop.
2. Press the Source button [ ] on the touch panel of the
projector or [ ] on the remote to select the VGA channel.
NOTE: If the projector does not display VGA when turned on, please
check the following:
1. Check that the VGA cable is connected properly and the input
source is changed to VGA.
2. Set the PC resolution to 1280 x 800.
3. Turn on the computer external video port and press FN + screen
switching key to switch the PC display information to the projector.
HD M I
HD M I
SMARTSTICK
DVD Player
Game Console
PC
Laptop
Smart Devices
Adjust the focus wheel to achieve a clear image.
Wireless Display / Miracast Connecting to Smart Devices
Troubleshooting
1. Insert Smart Device into HDMI port on projector.
2. Select Wireless App icon from projector Main Menu.
1. Projector will not power on
Check to ensure the power adapter is properly
connected and power light indicator is on.
2. Blurred image
Adjust focus wheel on projector until image is clear.
3. No image
Check to ensure the correct channel is selected on
projector. If you are connected via HDMI, ensure the
HDMI channel is selected in Input Source Menu.
4. Remote does not respond
- Use a quarter to open the back cover of remote to
ensure the plastic insert between the battery is
removed.
- Ensure there is nothing blocking the IR Window in front
of the projector.
- Ensure you are within range of the projector ( < 15 ft).
- Replace the battery.
1. Confirm that your Smart Device supports Widi/Miracast.
2. Select Widi/Miracast icon from projector Main Menu.
3. Open the wireless Display menu on your Smart Device.
4. Scan for device name “Projector” and connect.
5. Range: up to 15 ft
www.favientertainment.com
Widi/Miracast
Movie
Wireless App
Movie
DLNA
1. Select Network icon from projector Settings Menu.
2. Connect projector to the same WiFi network as your
Smart Device.
3. Verify that your Smart Device has a DLNA media sharing
app installed.
4. Select DLNA icon from projector Settings Menu.
5. Launch DLNA media sharing app on your Smart Device
to start displaying compatible media.
NOTE: Not for use with iOS devices.
Network
Picture Mode
N e t w o r k
Asd b zn xb c f
Asd b zf
Db znc f
-
1
-
2
FAVI Pico+ J5-PICO-HD User manual
- Category
- Projectors
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI