2. Home
  3. Domestic appliances
  4. Large home appliances
  5. Freezers
  6. Inalto
  7. IIUF200

Inalto IIUF200 Quick start guide

  • Hello, I'm your chat assistant. I've reviewed the user guide for the InAlto Freezer IIUF200. This document details features such as its 200L capacity, electronic controls, and Total No Frost system. I'm ready to answer any questions you have about the freezer and its functions.
  • How long should I wait before switching on the freezer after delivery?
    What should I do before first use?
    How do I adjust the freezer temperature?
    What temperature display shows?
MODEL/IIUF200 WWW.INALTO.HOUSE
QUICK START GUIDE
200L
Integrated
Freezer
FEATURES
200L Capacity, Easy-fit Integrated Design,
Electronic Controls, Total No Frost, Low Noise: 41db,
Drawer Storage
MODEL/IIUF200 WWW.INALTO.HOUSE
QUICK START GUIDE
SUPPORT
Telephone: 1300 11 4357
Email: support@residentiagroup.com.au
DETAILS
Energy Rating (MEPS): 3 Stars
Dimensions (W, D, H mm): 540 × 540 × 1769
Warranty: 2 Years
Congratulations on your new
InAlto 200L Integrated Freezer!
YOUR INTEGRATED REFRIGERATOR
1. Freezer storage drawers
2. Temperature control panel
2
1
9
Control panel
A. Freezer temperature adjustment sensor
This button is used to adjust the temperature within the freezer. Press
this sensor once to activate adjustment, and then as many times as
necessary until the desired level is selected. The settings range from 1
to super freeze (snowflake) with 1 being the warmest and super freeze
being the coldest.
Please note: Where possible, avoid having the temperature setting on
5 or super freeze (snowflake) all of the time. This well help to alleviate
strain on the compressor and system.
B. Freezer temperature setting display
This display will illuminate the current temperature setting. Adjusting
the temperature will cycle through this display.
Please note: You do not use numbers 1 to 5 or the snowflake to
change the temperature. Instead, use the freezer temperature
adjustment sensor (A).
C. Power button
Use this sensor to switch the appliance on and o (standby mode).
The sensor will be illuminated when the appliance is o.
Fig. 3
A B C
BEFORE FIRST USE
You must allow the freezer to settle
for at least 24 hours prior to switching
on the power.
It is recommended that you clean
the interior prior to first use followed
by thoroughly drying the interior.
CONTROL PANEL
A Freezer temperture adjustment:
Press this button once to activate
the adjustment and then press it
as many times as necessary to
achieve the desired temperature
level. The settings range from
1 to Super Freeze (Snowflake).
B Freezer temperature display
C ON/OFF Button
REGISTER YOUR APPLIANCE
AU: www.inalto.house/registration
NZ: www.inalto.house/nz/registration
/