2. Computers & electronics
  3. Computer components
  4. Chassis components
  5. Racks
  6. Rack accessories
  7. Ranger design
  8. 18-U1806

Ranger design 18-U1806 Installation guide

  • Hello! I've reviewed the Installation Guide for the RANGER DESIGN 18-U1806 Crossbar. This document provides detailed steps for assembling and installing the crossbars on various vehicles like the Nissan NV, Sprinter, Transit and Promaster. It includes necessary tool and fastener information. I'm ready to answer any questions you have about the installation process or features of the crossbar.
  • What tools are required for the crossbar installation?
    What vehicles are compatible with the foot placement guide?
    What is the model number of this crossbar?
INSTALLATION GUIDE
18-U1806 Crossbar
2 Bars ( 72" )
FOOT PLACEMENT GUIDE
VEHICLE DIMENSION ( A )
Nissan nV 7"
Sprinter 10" hr, 6 - 1/2" lf
transit 8 - 7/8"
promaster 7 - 1/16"
A
72"
For technical support, contact us at 1-800-565-5321 18-U1806 Installation Guide | REV. B1 | Page 2
Item No. Description Qty.
18-187 Foot 4
18-041 Max Rack Crossbar 2
18-198 End Plastic Plug 4
18-191 Stud Plate 4
94-1806 Fastener kit 1
BILL OF MATERIALS
18-198
18-187
18-191
18-041
PHASE 1 – ASSEMBLY
1.1 SETUP
1.1.1 Verify all parts are present.
QUICK START GUIDE
q 1.1.1 Setup ( Verify all parts are present )...............................................................................................
q 1.2.1 assembly ( put the crossbar in the table ).........................................................................................
q 1.2.2 assembly ( attach the feet to the crossbars )...................................................................................
q 2.1.1 Crossbar Installation........................................................................................................................
Phase 1 - Assembly
Phase 2 - Install
2
2
3
4
PHASE 1 – ASSEMBLY
1.2 PREPARATION
1.2.1 Remove one crossbar from the box and put the crossbar on the table.
NOTE:
for max rack open the next box and follow
the install guide inside the box on how to
assembled you rack.
For technical support, contact us at 1-800-565-5321 18-U1806 Installation Guide | REV. B1 | Page 3
FOOT PLACEMENT GUIDE
VEHICLE DIMENSION ( A )
Nissan nV 7"
Sprinter 10" hr, 6 - 1/2" lf
transit 8 - 7/8"
promaster 7 - 1/16"
1.2.2 Attach the feet to the crossbars.
FOR ACCESS STOW
FASTENERS USED
8× ( 17 ft • lbs )
#90-203 Hex Bolt 5/8"
#98-123 Lock Washer 5/16"
#98-117 Flat Washer 5/16"
#94-250 Channel Nut 5/16"
TOOLS
q Cordless Impact
q 1/2" Socket
For technical support, contact us at 1-800-565-5321 18-U1806 Installation Guide | REV. B1 | Page 4
TOOLS
q Ratchet
q 1/2" Socket
FASTENERS USED
4× one crossbar ( 17 ft • lbs )
#94-105 Hex Nut
#98-123 Lock Washer
#98-117 Flat Washer
recommended 65"
FOOT PLACEMENT GUIDE
VEHICLE DIMENSION ( A )
Nissan nV 7"
Sprinter 10" hr, 6 - 1/2" lf
transit 8 - 7/8"
promaster 7 - 1/16"
2.1.1 Install the crossbars to the mounting track ( to install the mounting track please follow the
install guide of the mounting track ).
PHASE 1 – INSTALL
2.1 CROSSBAR INSTALLATION
/