•Fitting: Steel with black marble base & steel shade.
•Lamp type: Excluding: 1 x E27 GLS maximum 60W.
•Voltage: 220-240V ~ 50/60Hz.
•Protectionagainstelectricshock:Class2.Doesnotrequireearthing.
• IP: 20. Protected against solid foreign objects of 12.5mm Ø and greater, not
protected against water.
•Notforoutdooruse.
•Maximum Ambient temperature range: 20ºC - 40ºC.
•Feature: Inline foot switch.
•Spare shade: N/A.
•Dimensions: (H)2210mm x (D)2080mm x (Ø)445mm.
FL101 - attachments:
Iftheexternalexiblecableorcordofthisluminaireisdamaged,itshouldbe
exclusivelyreplacedbythemanufacturerorhisserviceagentorasimilarqualied
person in order to avoid a hazard.
To ensure that you get maximum longevity and maximum use out of your luminaire,
please observe the following safety instructions.
Electrical products can cause death, injury, or damage to property.
Installationoftheluminairemustbecarriedoutbyaqualiedelectrician,in
accordance with SANS 10142. On completion of installation, ensure that the
CerticateofComplianceisupdated.
•Beforeconnectingthisluminaire,ensurethatvoltageindicatedontheratinglabel
corresponds with the mains voltage in your home.
•Whenchangingthelamp,ensurethatthepoweristurnedoff.
•Thisluminaireischeckedinfullforconformitytothequalitystandardsand
safety \ requirements.
•Themanufacturer/supplierisnotresponsibleforanydamageofpropertiesand
persons, caused by the incorrect use or installation of the luminaire.
•Shouldyoubeunsureofhowtoinstallthisluminairecorrectly,pleaseconsulta
professional electrician or your supplier for assistance.
•Ensureallitems/components,threadsandscrewsaretightlysecured.
IMPORTANT:
•Tamperingwiththisluminaire,I.E.Usingsiliconsealersorincorrectcabling,will
invalidate your warranty.
•Pleasecheckwhethertheconnectionofthepowercordissafeandreliable
before installation.
•Alwaysensurethatthemainssupplyvoltageiscorrect.
•Alwaysreplacethelampwithoneofanidenticalrating.
•Ensurethatyoudonotplacetheluminairenearanycombustiblematerials
and / or surfaces.
SPECIFICATIONSIMPORTANT SAFEGUARDS
Ensure the mains power is turned off or that the mains are unplugged from the
electrical outlet before inserting the E27 lamp or commencing with the installation.
•Unpackonastableflatsurfaceandassembleasperinstallationillustration.
•InsertE27lamp.
•Plugintoelectricaloutlet.
INSTALLATION
CLEANING
•Beforecleaningalwaysensurethepowersupplyisturnedoff.
•Donotimmersetheluminaireinwater.
•Noabrasiveproducts,solvents,detergentmaybeusedtocleanthisluminaire.
•Ensurethatthettingdoesnotcomeincontactwithcorrosivechemicals,etc.