Huawei Band 8: Your Fitness and Health Companion
With its advanced features, the Huawei Band 8 is your ultimate fitness and health companion. It boasts water resistance, making it your perfect partner for swimming and other water activities. Track your progress accurately with its 10 ATM water resistance rating, which withstands up to 100 meters of water pressure. Unleash your sporty side and dive into a world of possibilities, whether you're a seasoned swimmer or just starting out.
Huawei Band 8: Your Fitness and Health Companion
With its advanced features, the Huawei Band 8 is your ultimate fitness and health companion. It boasts water resistance, making it your perfect partner for swimming and other water activities. Track your progress accurately with its 10 ATM water resistance rating, which withstands up to 100 meters of water pressure. Unleash your sporty side and dive into a world of possibilities, whether you're a seasoned swimmer or just starting out.
Water-resistant and dust-resistant level definition and usage scenario description of
wearable devices
Being water-resistant and dust-resistant means that the wearable device prevents water and dust
from entering inside and damaging the interior components and the mainboard.
In the following test scenarios, the normal temperature ranges from 15°C to 35°C, the relative
humidity ranges from 25% to 75%, and the atmospheric pressure ranges from 86 kPa to 106 kPa
(the standard atmospheric pressure is 101.325 kPa).
Water
Resistance Level
Resistance Level Definition
Resistance Scenario
Dive (Depth up to
100 meters)
Complies with the EN 13319
standard for diving accessories.
Products that meet this
standard can withstand 200
cycles of normal pressure (1
ATM) and excess pressure (11
ATM at most), and remain at
excess pressure for one minute
in each cycle.
The wearable device complies with the EN
13319 standard for diving accessories,
and supports diving with a maximum
depth of 100 meters. (For safety reasons,
please do not dive alone.)
The wearable device is not suitable for
use in the following scenarios:
1. Diving activities exceeding a depth of
100 meters.
2. Hot showers, hot springs, saunas
(steam rooms), and other activities in
high-temperature and high-humidity
environments.
3. Platform dives, high-pressure rinsing, or
other activities that involve high water
pressure or fast-flowing water.
(Damage to the wearable device caused
by immersion in liquid is not covered by
the warranty if the wearable device is
used in an unsuitable scenario.)
Dive (Depth up to
30 meters)
Complies with the EN 13319
standard for diving accessories.
Products that meet this
standard can withstand 200
The wearable device complies with the EN
13319 standard for diving accessories,
and supports free diving with a maximum
cycles of normal pressure (1
ATM) and excess pressure (3.3
ATM at most), and remain at
excess pressure for one minute
in each cycle.
depth of 30 meters. (For safety reasons,
please do not dive alone.)
The wearable device is not suitable for
use in the following scenarios:
1. Scuba dives and technical dives.
2. Diving activities exceeding a depth of
30 meters.
3. Hot showers, hot springs, saunas
(steam rooms), and other activities in
high-temperature and high-humidity
environments.
4. Platform dives, high-pressure rinsing, or
other activities that involve high water
pressure or fast-flowing water.
(Damage to the wearable device caused
by immersion in liquid is not covered by
the warranty if the wearable device is
used in an unsuitable scenario.)
10 ATM
It is a water-resistant standard
(ISO 22810) defined by the
International Organization for
Standardization (ISO). It
indicates that the wearable
device can stand up to
simulated 100-meter static
water pressure at room
temperature for 10 minutes.
The wearable device complies with the 10
ATM-rated resistance level under the ISO
22810:2010 standard, which indicates that
it can withstand up to 100-meter static
water pressure for 10 minutes. Water
resistance is not permanent, and the
performance may deteriorate with daily
wear and tear.
The wearable device can be used for
water activities such as those in swimming
pools and at the beach, and diving (the
supported depth and diving types vary
depending on the specific product model).
It can be worn and used during exercise,
on rainy days, and when washing your
hands.
If a watch with a speaker is soaked in
water or the watch is worn in water,
promptly remove water stains from the
speaker or use the drainage feature of the
watch to avoid the impact of the water
stains on the speaker.
The wearable device is not suitable for
use in the following scenarios:
1. Platform dives, high-pressure rinsing, or
other activities that involve high water
pressure or fast-flowing water.
2. Hot showers, hot springs, saunas
(steam rooms), and other activities in
high-temperature and high-humidity
environments.
3. Leather and metal straps are not
designed to withstand water or sweat. It
is recommended that you wear other
types of straps, if you wish to swim,
dive, or work out.
(Damage to the wearable device caused
by immersion in liquid is not covered by
the warranty if the wearable device is
used in an unsuitable scenario.)
5 ATM
It is a water-resistant standard
(ISO 22810) defined by the
ISO. It indicates that the
wearable device can stand up
to simulated 50-meter static
water pressure at room
temperature for 10 minutes,
and does not mean that the
These wearable devices comply with the 5
ATM-rated resistance level under the ISO
22810:2010 standard, which indicates that
they can withstand up to 50-meter static
water pressure for 10 minutes, but does
not actually mean that they are water-
resistant in water that is 50-meter deep.
Water resistance is not permanent, and
watch is water-resistant in
water that is 50 meters deep.
Wearable devices with a
resistance level of 5 ATM are
water-resistant when you are
swimming. You can wear this
type of wearable device when
swimming or taking part in
other water-related activities in
your daily life.
Dust-resistant level: If wearable
devices comply with the IEC
60529:2013 standard (level 6),
it means that no dust can get
inside.
the performance may deteriorate with
daily wear and tear.
Wearable devices can prevent dust from
living rooms, offices, laboratories, light
industrial studios, and storage rooms from
entering. They are not suitable in
particularly dusty environments.
It can be used in shallow waters such as
in swimming pools and at the beach, and
can be worn and used during exercise, on
rainy days, and when washing your
hands.
If a watch with a speaker is soaked in
water or the watch is worn in water,
promptly remove water stains from the
speaker or use the drainage feature of the
watch to avoid the impact of the water
stains on the speaker.
The wearable device is not suitable for
use in the following scenarios:
1. Scuba dives, platform dives, dives,
high-pressure rinsing, or other activities
that involve high water pressure or fast-
flowing water.
2. Hot showers, hot springs, saunas
(steam rooms), and other activities in
high-temperature and high-humidity
environments.
3. Leather and metal straps are not
designed to withstand swimming or
sweat. It is recommended that you wear
other types of straps, in such scenarios.
(Damage to the wearable device caused
by immersion in liquid is not covered by
the warranty if the wearable device is
used in an unsuitable scenario.)
IP68
Wearable devices that meet
this standard are resistant to
dust, and can be immersed in
water deeper than 1 meter at a
normal temperature and
pressure (the depth and
duration may vary depending
on the product model). It is a
higher standard than IPX7.
These wearable devices comply with the
IP68-rated resistance level under the IEC
60529:2013 standard.
Wearable devices can prevent dust from
living rooms, offices, laboratories, light
industrial studios, and storage rooms from
entering. They are not suitable in
particularly dusty environments.
They are resistant to being splashed by
water. However, we recommend that you
do not immerse your wearable devices in
water. You can wear your wearable device
when you exercise as they are resistant to
sweat or wash your hands. You can also
wear them when it is raining.
The wearable device is not suitable for
use in the following scenarios:
1. Scuba diving, swimming, snorkeling,
diving, or other activities with immersion
in water for a long time.
2. Showers, hot springs, saunas (steam
rooms), and other activities in high-
temperature and high-humidity
environments.
3. Activities related to high-speed water
currents, such as diving, water skiing,
surfing, motorized water sports (such as
speedboats and motorboats), car
washing, and rafting.
(Damage to the wearable device caused
by immersion in liquid is not covered by
the warranty if the wearable device is
used in an unsuitable scenario.)
IP67
Wearable devices that meet
this standard are resistant to
dust, dirt, and sand and can be
immersed in water up to 1
meter deep with a normal
temperature and pressure for
half an hour.
These wearable devices comply with the
IP67-rated resistance level under the IEC
60529:2013 standard.
Wearable devices can prevent dust from
living rooms, offices, laboratories, light
industrial studios, and storage rooms from
entering. They are not suitable in
particularly dusty environments.
They are resistant to being splashed by
water. However, we recommend that you
do not immerse your wearable devices in
water. You can wear your wearable device
when you exercise as they are resistant to
sweat or wash your hands. You can also
wear them when it is raining.
The wearable device is not suitable for
use in the following scenarios:
1. Swimming, snorkeling, diving, scuba
diving, or other activities with immersion
in water for a long time.
2. Showers, hot springs, saunas (steam
rooms), and other activities in high-
temperature and high-humidity
environments.
3. Activities related to high-speed water
currents, such as diving, water skiing,
surfing, motorized water sports (such as
speedboats and motorboats), car
washing, and rafting.
4. Other unsuitable types of use and
scenarios where the wearable device
may be placed in water that is more
than 1 meter deep or immersed in water
for more than 30 minutes.
(Damage to the wearable device caused
by immersion in liquid is not covered by
the warranty if the wearable device is
used in an unsuitable scenario.)
IP57
Cannot completely prevent dust
from entering, but the amount
of dust entering must not affect
the normal operation of the
equipment or affect safety. Is
able to prevent short-term
immersion, under a normal
temperature and pressure,
when the wearable device case
is temporarily immersed in
deep water with a depth of 1
meter for 30 minutes, and it will
not result in damage.
These wearable devices comply with the
IP57-rated resistance level under the IEC
60529:2013 standard.
Wearable devices can prevent dust from
living rooms, offices, laboratories, light
industrial studios, and storage rooms from
entering. They are not suitable in
particularly dusty environments, like
deserts, mines, and sand mines.
They are resistant to being splashed by
water. However, we recommend that you
do not immerse your wearable devices in
water. You can wear your wearable device
when you exercise as they are resistant to
sweat or wash your hands. You can also
wear them when it is raining.
The wearable device is not suitable for
use in the following scenarios:
1. Swimming, snorkeling, diving, scuba
diving, or other activities with immersion
in water for a long time.
2. Showers, hot springs, saunas (steam
rooms), and other activities in high-
temperature and high-humidity
environments.
3. Activities related to high-speed water
currents, such as diving, water skiing,
surfing, motorized water sports (such as
speedboats and motorboats), car
washing, and rafting.
4. Other unsuitable types of use and
scenarios where the wearable device
may be placed in water that is more
than 1 meter deep or immersed in water
for more than 30 minutes.
(Damage to the wearable device caused
by immersion in liquid is not covered by
the warranty if the wearable device is
used in an unsuitable scenario.)
IP55
Wearable devices that meet
this standard are not
completely resistant to dust, but
dust that comes into contact will
not affect its normal operation
or cause any safety issues.
These wearable devices are
resistant to being exposed to
water jets of 12.5 L/min aiming
at the cover from all directions
for 3 minutes.
These wearable devices comply with the
IP55-rated resistance level under the IEC
60529:2013 standard.
Wearable devices can prevent dust from
living rooms, offices, laboratories, light
industrial studios, and storage rooms from
entering. They are not suitable in
particularly dusty environments.
The wearable device is splash-proof and
water resistant. You can wear your
wearable device when you exercise as
they are resistant to sweat or wash your
hands. You can also wear them when it is
raining.
The wearable device is not suitable for
use in the following scenarios:
1. Being dropped into water, swimming,
diving, or any other behavior or activity
that immerses the wearable device in
water.
2. Showers, hot springs, saunas (steam
rooms), and other activities in high-
temperature and high-humidity
environments.
3. Activities related to high-speed water
currents, such as diving, water skiing,
surfing, motorized water sports (such as
speedboats and motorboats), car
washing, and rafting.
4. Other scenarios or types of use that
may cause the wearable device to be
exposed to high-speed water currents or
directly face the fast water flow for more
than 3 minutes, such as during long-
time use in heavy rain or rainstorms.
(Damage to the wearable device caused
by immersion in liquid is not covered by
the warranty if the wearable device is
used in an unsuitable scenario.)
IP54
Protected from limited dust
ingress. Dust won't affect
normal functions and safety
when using the wearable
device. Protected against water
splashes (up to 10 L/min) from
any angle for a maximum of 10
minutes.
The wearable device complies with the
IP54-rated resistance level under the IEC
60529:2013 standard.
The wearable device can prevent dust
from living rooms, offices, laboratories,
light industrial studios, and storage rooms
from entering. They are not suitable in
particularly dusty environments.
IP54-rated wearable devices can
withstand light rain for a short period of
time and sweat.
The wearable device is not suitable for
use in the following scenarios:
1. When you are underwater.
2. Showers, hot springs, saunas (steam
rooms), and other activities in high-
temperature and high-humidity
environments.
3. When you are washing cars, doing
water park activities or water sports,
such as diving, water skiing, surfing,
sailing, jet skiing, or other activities that
involve strong currents.
4. Other types of inappropriate use and
scenarios where the wearable device
may be in contact with strong currents
or with currents for more than 10
minutes.
(Damage to the wearable device caused
by immersion in liquid is not covered by
the warranty if the wearable device is
used in an unsuitable scenario.)
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
Huawei Band 8: Your Fitness and Health Companion
With its advanced features, the Huawei Band 8 is your ultimate fitness and health companion. It boasts water resistance, making it your perfect partner for swimming and other water activities. Track your progress accurately with its 10 ATM water resistance rating, which withstands up to 100 meters of water pressure. Unleash your sporty side and dive into a world of possibilities, whether you're a seasoned swimmer or just starting out.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Samsung Electronics SM-R370NZSAXAR User manual
-
Samsung Galaxy Fit2 Smart Watch User manual
-
Samsung SM-R890X User manual
-
Honor Band 6 Monochrome Replacement Wristband Comfortable To Wear User guide
-
Stim wave LBRD-915-2K User manual
-
MOBVOI Ticwatch Pro 5 User guide
-
-
Apple A2351 Smart watch User manual
-
Samsung SM-R850 User manual
-
Samsung GALAXY WATCH ACTIVE 2 ALUMINIUM 44MM AQUA BLACK User manual
