Laser Engraving Machine
Operating Manual
Parts List Product Introduction
Tripod
Power 5VDC 2AHost
Protective glass
USB-TYPE-C
Power line
Wi-Fi connection
indicator light
Power supply interface
Tripod assembly hole
Laser window
The distance between the machine and
the surface of the object to be engraved
must be set at about 200mm, otherwise
the engraving effect will be poor or there
will be no engraving marks. Connect power supply
The surface of the
object to be engraved
Touch switch
Pause/continue engraving
Important Safety Instructions
Warning: To reduce the risk of burns, electrocutions, or injury to persons!
Avoid direct laser radiation on eyes or skin
Strictly prohibit using this machine unattended!
Always wear protective glasses when use the machine
Prohibited from use in flammable objects or gases
Do not touch the socket with wet hand to reduce risk of electrocutions
Please cut off the power immediately in case of emergency
Scan the QR code to
download CarryLaser App
Scan for video
Model: CLX
Statement
Original instructions for CLX ，Please read all manual
instructions carefully before operating. VEVOR reserves clear
interpretation of our user manual. The appearance of the
product shall be subject to the product you received. Please
forgive us that we won't inform you again if there is any
technology or software updates on our product.
Manufacturer：
Kunshan Boye Electronic Technology Co., Ltd
Address：
Room 4, No. 777, Jimingtang South Road, Huaqiao
Town, Kunshan City, Jiangsu Province, China
EU Importer: WAITCHX
Address: 250 bis boulevard Saint -Germain 75007 Paris
UK Importer: FREE MOOD LTD
Address: 2 Holywell Lane, London, England, EC2A 3ET
CLX：V1.3
/
