2. horntools
  3. HUFJIM12

horntools HUFJIM12 Owner's manual

  • Hello! I've reviewed the installation guide for the Suzuki Jimny water tank skid plate. This document explains how to install the protective plate, detailing the removal of original screws and the use of both original and supplied screws for mounting. I'm ready to answer any questions you have about the installation process.
  • How many original screws need to be removed initially?
    How many screws are used to tighten the skid plate initially?
    What type of screws are used in step 4?
Einbauanleitung | Installation Guide
Unterfahrschutz Suzuki Jimny Kühler | Suzuki Jimny Water Tank Skid Plate
Artikelnummer | Item No.: HUFJIM12
- www.horntools.com
horntools GmbH . Wallenmahd 23 . 6850 Dornbirn . Austria
1
Die 4 originalen Schrauben entfernen
Remove 4 pcs factory screws
Den Unterfahrschutz platzieren
Put water tanks’ skid plate into place
Die hinteren 2 Schrauben anziehen
Tighten 2 pcs screws (Step 1 screws)
Schritt 1
Step 1
Schritt 2
Step 2
Schritt 3
Step 3
Einbauanleitung | Installation Guide
Unterfahrschutz Suzuki Jimny Kühler | Suzuki Jimny Water Tank Skid Plate
Artikelnummer | Item No.: HUFJIM12
- www.horntools.com
horntools GmbH . Wallenmahd 23 . 6850 Dornbirn . Austria
2
Wie auf dem Foto abgebildet die mitgelieferten 4 Stück M6 Schrauben anziehen
Tighten 4 pcs M6 screws as shown in image (the screws are packed with skid plate)
Die letzten zwei M8 Original Schrauben anziehen
Tighten 2 pcs M8 screws from Step 1
Schritt 4
Step 4
Schritt 5
Step 5
/