Balt 34443, Locking Pencil Drawer Accessory Operating instructions

Hello! I've reviewed the Assembly Instructions for the Trend Podium Desk Drawer 34443. This document details how to assemble the drawer, including how to unlock it, attach the outer body to a tabletop and insert a pencil tray. I'm ready to assist with your questions about its assembly.
How do I remove the drawer?

How do I attach the outer drawer body?

What do I do after I place the drawer into the outer body?

Part Drawing Description Qty Part Drawing Description Qty

WOW

34443 Trend Podium Desk Drawer

Hardware List

BPencil Tray 1 EA

Screw 4 EA

P1 Drawer 1 EA

34443_09-10-14

Assembly Instruction

1. Use Key Set (C) to Unlock Drawer. Remove the drawer from the outer Drawer body (P1) by

pressing tabs on the drawer slides as you pull out the drawer. See illustration #1.

2. Place the outer drawer body under the Table top and attach it with four Screws (A). Make sure the

Drawer front, when inserted back into the drawer outer body, is flush or just behind the front edge

of the Table Top.

3. Place the Drawer back into the outer drawer body. Insert the Pencil Tray (B) into the Drawer .

as shown below.

C Key Set 1 EA

Table Top

illustration #1