Ascento Group Australia Ph: 1800 807 604 Fax: 1800 807 609 Email: sales@ascento.com.au Web: www.reefe.com.au EDITION 9 - © Copyright Ascento 2019. ll rights reserved. Specications are nominal and are subject to change without notice
REEFE ENGINE DRIVEN PUMPS
116 Ascento Group Australia Ph: 1800 807 604 Email: sales@ascento.com.au Web: www.reefe.com.au EDITION 9 - © Copyright Ascento 2019. All rights reserved. Specications are nominal and are subject to change without notice. Power ratings may vary with load on motor.
2” / 3” POLY PUMPS
These premium grade Honda powered pumps are fitted
with a poly wet end, noryl impeller and viton seals to
suit pumping of agricultural chemicals and some other
mildly corrosive liquids. Always check suitability of
the liquid with seal types before proceeding. Engine
covered by a 3 year manufacturer’s warranty, 2 year
warranty on the wet end.
MH POLY SERIES
APPLICATIONS
• Salt water
• Waste water
• Liquid fertilisers
• Milk
• Some milk acids
FEATURES & BENEFITS
• Genuine HONDA engine - backed by Honda 3
year universal warranty
• Corrosion resistant wet end
• Rubber mounts
• Engine with oil sensor
CONSTRUCTION
• Noryl impeller and volute
• Viton mechanical seal, EPDM check valve &
o-rings
• Hose tails, hose clips and suction strainer
included
• Carry handle
Pumps for the Future
P
R
E
M
I
U
M
S
E
R
I
E
S
0
5
10
15
20
25
30
35
0 100 200 300 400 500 600 700 800 900 1000
Head (Metres)
Litres / minute
MH030
MH020
Flow (Litres/Minute)
Head (m)
3” POLY PUMP
CODE PUMP
MODEL ENGINE FUEL
TANK SUCTION
SIZE DISCHARGE
SIZE
MAX
HEAD
(M)
MAX FLOW
RATE
(L/MIN)
PUMP
BODY
HORSE
POWER
CLASS
WEIGHT
(KG)
40310 MH020P Honda GX160, recoil start w carry handle 3.1L 2” 2” 30 520 Poly 5.5 26
40315 MH030P Honda GX160, recoil start w carry handle 3.1L 3” 3” 28 920 Poly 5.5 27
2” POLY PUMP
NOTE
1 Check suitability with seal types before proceeding.
2 Not food grade.
Not suitable for molasses or molasses mixture.