Page is loading ...
Set of cover plate and materials for installing a MULTIGATE 3
MULTIGATE-Abdeckplatte-Set_Vx.x_PI_2023-04_EN 1
Subject to technical changes
MULTIGATE cover plate
1 MULTIGATE cover plate
Set of cover plate and materials for installing a MULTIGATE 3
1.1 Front view
Fig. 1: Cover plate front view and back view
1.2 Features
• Set consisting of dummy plate for sealing the MULTIGATE opening in the control cabinet door,
plus materials for installing a MULTIGATE 3
1.3 Scope of supply
• 1 x dummy plate with top-hat rail
• 4 x screw
• 4 x nut
• 4 x washer
1.4 Installing the plate
Fig. 2: Control cabinet door front view and back view
1. Install the cover plate at the place of the MULTIGATE 2.
2. Install the MULTIGATE 3 on the top-hat rail attached to the dummy plate.
NOTICE
• Please pay attention to the separate information and instructions in the respective product infor-
mation for the installation of the MULTIGATE 3.
9
/
6
&%86
+
)%86
+
6
/
9
)%86
&%86
287387 ,1387
/
1
0RGEXV
2))
21
2))
21
9
/
6
&%86
+
)%86
+
6
/
9
)%86
&%86
287387 ,1387
/
1
0RGEXV
2))
21
2))
21
9
/
6
&%86
+
)%86
+
6
/
9
)%86
&%86
287387 ,1387
/
1
0RGEXV
2))
21
2))
21
9
/
6
&%86
+
)%86
+
6
/
9
)%86
&%86
287387 ,1387
/
1
0RGEXV
2))
21
2))
21
Set of cover plate and materials for installing a MULTIGATE 3
2 MULTIGATE-Abdeckplatte-Set_Vx.x_PI_2023-04_EN
Subject to technical changes
MULTIGATE cover plate
1.5 Technical data
Dummy plate dimensions (W x H x D) 488mm x 88mm x 3mm
Material Aluminium
Top-hat rail DIN EN 60715, length 240mm (fixed riveted)
Screws 4 x M6x20mm
Weight About 520g
/
