VS1220

Behringer VS1220 User manual

  • Hello! I am an AI chatbot trained to assist you with the Behringer VS1220 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ENGLISH
This manual is available in English, German, French,
Spanish, Italian, Russian, Polish, Dutch, Finnish, Swedish,
Danish, Portugese, Greek, Japanese and Chinese. There may
also be more current versions of this document. Download them
by going to the appropriate product page at:
www.behringer.com
A50-A4R30-08001
User Manual
EUROLIVE
VS1220/VS1220F/
VS1520
High-Performance 600-Watt PA
Speaker with 12" / 15" Woofer
and Electro-Dynamic Driver
Thank you
Thank you for purchasing one of our EUROLIVE VS series
loudspeakers. These loudspeakers offer powerful, pristine sound
reinforcement in a lightweight, portable package. Furthermore,
they can act as pieces to an expandable sound system, with ¼" TS
inputs and outputs, pole mounting sockets and recessed handles.
Heavy duty low-frequency drivers deliver thumping bass and
powerful midrange clarity while high-frequency compression
drivers cut through the mix with smooth, shimmering treble. Were
certain these versatile loudspeakers will bring you years of faithful
sound reinforcement and ensure that your music is heard the way
it should be!
Table of Contents
Thank you ..................................................................... 1
Important Safety Instructions ................................... 2
1. Before You Get Started ........................................... 3
2. Connections ............................................................ 3
3. Optimal Operation ................................................. 4
4. Additional Considerations .................................... 5
5. Application Examples ............................................ 5
6. Specifications .......................................................... 7
Legal Disclaimer .......................................................... 8
Warranty ....................................................................... 9
ENGLISH
EUROLIVE VS1220/VS1220F/VS1520 User Manual
2
Important Safety Instructions
Caution
*
To reduce the risk of electric shock, do not remove the top
cover (or the rear section). No user serviceable parts inside;
refer servicing to qualified personnel.
Warning
!
To reduce the risk of fire or electric shock, do not expose this
appliance to rain and moisture. The apparatus shall not be
exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus.
Caution
!
This symbol, wherever it appears, alerts you to the presence
of uninsulated dangerous voltage inside the enclosure
voltage that may be sufficient to constitute a risk of shock.
Caution
!
This symbol, wherever it appears, alerts you to important
operating and maintenance instructions in the
accompanying literature. Please read the manual.
Caution
!
Read these instructions.
{1}.
Keep these instructions.
{2}.
Heed all warnings.
{3}.
Follow all instructions.
{4}.
Do not use this device near water.
{5}.
Clean only with a dry cloth.
{6}.
Be sure to mount your speakers on a solid, stable and level base or stand.
{7}.
Vibrating floors do not provide reliable support for speaker enclosures
or stacks.
Do not install near any heat sources such as radiators, heat registers, stoves,
{8}.
or other apparatus (including amplifiers) that produce heat.
Only use attachments/accessories specified by the manufacturer.
{9}.
Use only with the cart, stand, tripod, bracket, or
[10].
table specified by the manufacturer, or sold with the
device. When a cart is used, use caution when moving
the cart/device combination to avoid injury from
stumbling over it.
Refer all servicing to qualified service personnel.
[11].
Servicing is required when the unit has been damaged in any way, liquid has
been spilled or objects have fallen into the device, the unit has been exposed
to rain or moisture, does not operate normally, or has been dropped.
Do not block any ventilation openings. Install in accordance with the
[12].
manufacturers instructions.
ENGLISH
EUROLIVE VS1220/VS1220F/VS1520 User Manual
3
Before You Get Started1.
Shipment1.1
Your VS series loudspeaker was carefully packed at the assem-
bly plant to assure secure transport. Should the condition of
the cardboard box suggest that damage may have taken place,
please inspect the unit immediately and look for physical indica-
tions of damage.
Damaged equipment should NEVER be sent directly to us.
Please inform the dealer from whom you acquired the unit
immediately as well as the transportation company from
which you took delivery. Otherwise, all claims for replace-
ment/repair may be rendered invalid.
Please always use the original packaging to avoid damage
due to storage or shipping.
Never let unsupervised children play with the loudspeaker
or with its packaging.
Please dispose of all packaging materials in an environmen-
tally friendly fashion.
Online registration1.2
Please do remember to register your new BEHRINGER
equipment right after your purchase by visiting
http://www.behringer.com (alternatively www.behringer.de) and
kindly read the terms and conditions of our warranty carefully.
Should your BEHRINGER product malfunction, our goal is to
have it repaired as quickly as possible. To arrange for warranty
service, please contact the retailer from whom the equipment
was purchased. Should your BEHRINGER dealer not be located
in your vicinity, you may directly contact one of our subsidiaries.
Corresponding contact information is included in the original
equipment packaging (Global Contact Information/European
Contact Information). Should your country not be listed, please
contact the distributor nearest you. A list of distributors can be
found in the support area of our website (www.behringer.com/
support). Registering your purchase and equipment with us
helps us process your repair claims quicker and more efciently.
Thank you for your cooperation!
Basic operation1.3
Using the VS series loudspeakers is easy and intuitive. Simply
follow these steps to achieve the best possible sound:
Plug the line-level outputs from a sound source such as a 1.
mixer or stereo system into a power amp of appropriate size
(see 4.2 Power amp rating). Make sure the sound source and
amplier are turned off.
Using ¼" TS speaker cables, plug the power amp output into 2.
the ¼" input on the back of the speaker. DO NOT use instru-
ment cables (i.e., guitar cords) for this connection!
If using a pair of VS loudspeakers, run the amp in stereo 3.
operation. If using just one loudspeaker, mono operation is
preferable.
If using four or more loudspeakers, there are a few ways to 4.
make the connections. The rst is to use two power amps,
one for each pair. Another is to connect the rst pair of loud-
speakers in normal stereo operation, then use the ¼" output
jacks on the back of the loudspeakers to link the second pair
of loudspeakers. This way each channel on the power amp is
driving two loudspeakers. Make sure that the wattage and
ohm rating are appropriate for this situation.
Caution – Never connect multiple power amps to one loud-5.
speaker. Doing so could cause the very fabric of reality to
unravel, sending the entire universe into oblivion. Worse yet,
it could destroy your ampliers and loudspeaker.
Turn the sound source on (mixer, stereo, etc.). 6.
Make sure the volume/gain control on the power amp is 7.
turned all the way down, and then turn the power on.
Activate the sound source, whether it is playing music from 8.
a CD player or speaking into a microphone, and adjust the
levels. Gradually raise the power amp volume level to desir-
able level. If distortion occurs, turn the power amp volume
down. Should the problem persist, make sure distortion is
not occurring at the sound source. If you reach the desired
volume level by barely turning up the power amp level/gain,
turn the sound source output down to allow the power amp
to push the speakers more.
Rock ‘n Roll!9.
Connections 2.
The VS series features two parallel ¼" TS loudspeaker
[1]
inputs. You can connect one of the connectors to the output
on your power amp and tap into the signal from the amp
on the second connector, in order, for example, to feed this
signal into an additional loudspeaker.
Fig. 2.1 Connector panel
ENGLISH
EUROLIVE VS1220/VS1220F/VS1520 User Manual
4
ATTENTION: Never connect the output signals of different
power amps to both parallel inputs at the same time. This
may permanently damage your equipment.
When several loudspeakers are wired
in parallel, the overall impedance Z
T
to
be handled by the power amp can be
calculated, as shown here, from the individual impedance
values of the connected speakers:
For the VS series, here are typical connection scenarios:
Two 8 Ohm speakers in parallel = 4 Ohms
Four 8 Ohm speakers in parallel = 2 Ohms
Two 4 Ohm speakers in parallel = 2 Ohms
Four 4 Ohm speakers in parallel = 1 Ohm
Your amplier may be damaged if the actual impedance
drops below its input impedance. Please make sure that
the calculated total impedance Z
T
is not smaller than the
minimum impedance specied for your amplier.
Optimal Operation3.
We have developed the VS series for use in a wide range of
possible applications. Of course, the sound of your loudspeak-
ers depends on the acoustic characteristics of the room/space
in which they are being used. The following chapters of this
manual will give you information about getting the most out of
your EUROLIVE loudspeakers.
Loudspeaker placement3.1
Here are some tips to get optimal sound and performance from
your loudspeaker(s):
Elevate the loudspeaker at or above head level. High frequen-
cies are the segment of the audio spectrum responsible for
clarity and speech intelligibility. They can get mufed by the
front row of the audience, so we recommend positioning your
loudspeakers so the high-frequency drivers are slightly above
the height of the audience. The more you can get everyone in
direct earshot, the better. Imagine the loudspeaker is a giant
ashlight, and you want to illuminate everyone in the room.
Avoid placing full-range loudspeakers in a corner or right next
to a wall. This enhances the low frequencies and can cause
the sound to get muddy. Subwoofers may be placed almost
anywhere since low frequencies are not highly directional.
Make sure that the loudspeakers are not in a place where they
could be knocked over by dancing audience members, overly
eccentric stage performers, sudden earthquakes, etc.
Some rooms, such as gymnasiums and auditoriums, create a
large amount of natural reverb, making it difcult to maintain
intelligible sound. Laying carpet or rugs on the ground and
curtains across windows or brick walls will help dampen the
reections and improve the overall sound.
How to prevent feedback3.2
Always place the “front of house” speakers ahead of the micro-
phones (from the audience’s perspective), and never behind. Use
professional oor monitors or an in-ear monitoring system to
allow the stage performers to hear.
How to avoid feedback when 3.3
working with record players
(DJ applications)
In applications with record players, bass feedback can occur.
Bass feedback occurs when low frequencies get back to the
pickup and are reproduced on the loudspeakers. The most
common causes for this are: speakers located too closely to
the record player, a room with a wooden oor, or presence of a
podium or a platform. In such cases, it is best to move the loud-
speakers away from the record player and remove them from the
stage, so that they are located on rm ground. Another option
is to use raised stands, which prevent the loudspeakers from
having a direct contact with the ground.
Loudspeaker protection by using a 3.4
low-cut filter
Try to prevent damage to your loudspeakers caused by extreme
oscillation of the low-frequency driver due to subsonic noise
and extremely deep frequencies. Use an equalizer to cut off
those frequencies that fall below your loudspeakers’ frequency
range, or use a low-cut/high-pass lter. Most equalizers and
sound-improvement systems offer a low-cut function, like the
BEHRINGER ULTRAGRAPH DIGITAL DEQ1024, for example.
Using a low-cut lter in your signal path is particularly recom-
mended if you use record players or CD players as your signal
source. CD players often produce extremely deep frequencies,
which can lead to extreme excursions of the low-frequency
driver.
Fig. 2.3 ¼" TS loudspeaker connector
T
ENGLISH
EUROLIVE VS1220/VS1220F/VS1520 User Manual
5
Additional Considerations4.
Length and diameter of loudspeaker 4.1
cables
Loudspeaker cables whose diameter is too small can consider-
ably limit the power amp performance. The longer the cable,
the more pronounced the problem. As a result, musicians
often simply “turn up” the amp, which can lead to loudspeaker
damage. Therefore, don’t use cables longer than 15 m (45 ft.).
For most applications, this will not be necessary. Cable diameter
should be at least 14 - 12 gauge.
Power amp rating4.2
Selecting the right amp can turn out to be rather difcult.
Therefore, stick to the following rule of thumb: the power rating
of your amp should be roughly twice the loudspeaker load capac-
ity. A loudspeaker rated at 200 Watts continuous performance
can easily be powered by an amp rated at 400 Watts output
power. An optimal addition to your speaker system would be the
BEHRINGER EUROPOWER EP2000 power amp, for example.
Fuses4.3
We do not recommend the use of fuses with loudspeaker applica-
tions. Damage to loudspeakers can be the result of high peak
signals and high output power. However, fuses can only offer
protection from one of these two factors, and never from both.
Additionally, fuse resistances are sometimes nonlinear, leading
to distortion and unpredictable overdriving.
Protecting your equipment4.4
Always try to nd the optimal signal level. Avoid overdriving
your amp.
Keep in mind the physical limitations of your PA system.
Use a limiter to restrict the output signal level. Place the
limiter between the mixing console and the power amp. For
this purpose, our proven AUTOCOM PRO-XL MDX1600,
COMPOSER PRO-XL MDX2600 and MULTICOM PRO-XL
MDX4600 compressors offer an outstanding solution. All
models can be used as a limiter: the audio signal doesn’t
overdrive any more, and unpleasant “peaks” are effectively
avoided.
Our ULTRADRIVE PRO DCX2496 and SUPER-X CX3400/
CX2310 crossovers are particularly well-suited for protect-
ing your equipment: for each output, they have
independent limiters.
Application Examples5.
Full-range stereo operation5.1
In this example, the main output signal of a mixing console is
connected to a power amplier. Both the outputs and inputs are
stereo. A full-range VS series loudspeaker is connected to each of
the amplier outputs, and these loudspeakers reproduce the
entire frequency range.
EUROLIVE
VS1520
EUROPOWER EP2000
XENYX 1202FX
Fig. 5.1 Full-range stereo operation
ENGLISH
EUROLIVE VS1220/VS1220F/VS1520 User Manual
6
Full-range stereo operation with 5.2
floor monitors
This example is a variation of the example above, with the
addition of several VS1220F oor monitors. Two separate
monitor outputs from the mixing console are connected to the
inputs of a stereo power amplier. A VS1220F is connected to
each amplier output, and a second VS1220F is connected to the
parallel outputs of the rst set of VS1220F monitors.
EUROLIVE VS1220F
EUROLIVE VS1220
EUROPOWER EP2000
AUX 1
SEND
LR AUX 2
SEND
EUROPOWER EP2000
XENYX 2442FX
Fig. 5.2 Full-range stereo operation with oor monitors
Two-way stereo operation with a 5.3
crossover, full-range loudspeakers and
subwoofers
Using an external active crossover, the main output signal of a
mixing console is split into two signals. One signal covers the
lower frequency range and the other signal covers the mid and
high frequency range. The recommended crossover frequency is
150 Hz. Then, the mid-high frequency signal is connected to a
stereo power amplier. A VS series loudspeaker is connected to
each of the amplier outputs. The low-frequency signal is
connected to an additional power amplier, which powers two
subwoofers.
EUROLIVE VS1220 EUROLIVE VP1800S
EUROPOWER EP2000
SUPER-X PRO CX2310
XENYX 1202FX
Fig. 5.3 Two-way stereo operation with subwoofers
ENGLISH
EUROLIVE VS1220/VS1220F/VS1520 User Manual
7
Specifications6.
Continuous Power (IEC 60268-5)
VS1220 150W
VS1220F 150 W
VS1520 150 W
Peak Power
VS1220 600 W
VS1220F 600 W
VS1520 600 W
Type
VS1220 2-way full-range loudspeaker
VS1220F 2-way full-range loudspeaker
VS1520 2-way full-range loudspeaker
Frequency Response
VS1220 60 Hz – 20 kHz
VS1220F 55 Hz – 20 kHz
VS1520 50 Hz – 20 kHz
Impedance
VS1220 8 Ohms
VS1220F 8 Ohms
VS1520 8 Ohms
Sound Pressure Level (SPL)
VS1220 93 dB (Full space, 1 W @ 1 m)
VS1220F 93 dB (Full space, 1 W @ 1 m)
VS1520 94 dB (Full space, 1 W @ 1 m)
Dispersion
VS1220 80° x 40°
VS1220F 80° x 40°
VS1520 80° x 40°
Crossover Frequency
VS1220 3.5 kHz
VS1220F 3.5 kHz
VS1520 3.0 kHz
Rigging Fittings
VS1220 ergonomically shaped handle;
integral tripod/stand adapter
VS1220F ergonomically shaped handle
VS1520 ergonomically shaped handle;
integral tripod/stand adapter
HF Driver
VS1220 Dual electro-dynamic drivers
VS1220F Dual electro-dynamic drivers
VS1520 Dual electro-dynamic drivers
LF Driver
VS1220 12 in / 307 mm
VS1220F 12 in / 307 mm
VS1520 15 in / 385 mm
Width
VS1220 14.6 in / 370 mm
VS1220F 17.3 in / 440 mm
VS1520 17.9 in / 455 mm
Height
VS1220 23.6 in / 600 mm
VS1220F 16.9 in / 430 mm
VS1520 27.0 in / 685 mm
Depth
VS1220 16.9 in / 430 mm
VS1220F 22.6 in / 575 mm
VS1520 18.3 in / 465 mm
Weight
VS1220 37.7 lb / 17.1 kg
VS1220F 34.2 lb / 15.5 kg
VS1520 48.3 lb / 21.9 kg
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these
efforts, modifications may be made from time to time to existing products without prior notice. Specifi-
cations and appearance may differ from those listed or illustrated.
ENGLISH
EUROLIVE VS1220/VS1220F/VS1520 User Manual
8
Legal Disclaimer
Technical specications and appearance are subject to change without
notice. The information contained herein is correct at the time of printing.
BEHRINGER, accepts no liability for any loss which may be suffered by any
person who relies either wholly or in part upon any description, photograph or
statement contained herein. Colors and specications may vary slightly from
product. Our products are sold through authorized dealers only. Distributors
and dealers are not agents of BEHRINGER, and have absolutely no authority
to bind BEHRINGER, by any express or implied undertaking or representation.
No part of this manual may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including photocopying and recording of any
kind, for any purpose, without the express written permission of BEHRINGER
International GmbH.
ALL RIGHTS RESERVED. © 2008 BEHRINGER, International GmbH,
Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich, Germany.
Tel. +49 2154 9206 0, Fax +49 2154 9206 4903
ENGLISH
EUROLIVE VS1220/VS1220F/VS1520 User Manual
9
Warranty
Other warranty rights and national law§ 1
This warranty does not exclude or limit the buyer’s statutory rights
[1].
provided by national law, in particular, any such rights against the seller
that arise from a legally effective purchase contract.
The warranty regulations mentioned herein are applicable unless they
[2].
constitute an infringement of national warranty law.
Online registration§ 2
Please do remember to register your new BEHRINGER equipment right after
your purchase by visiting http://www.behringer.com and kindly read the terms
and conditions of our warranty carefully. Registering your purchase and equip-
ment with us helps us process your repair claims quicker and more ef ciently.
Thank you for your cooperation!
Warranty§ 3
BEHRINGER (BEHRINGER International GmbH including all
[1].
BEHRINGER subsidiaries, except BEHRINGER Japan) warrants the
mechanical and electronic components of this product to be free of defects
in material and workmanship for a period of one (1) year
*
from the original
date of purchase, in accordance with the warranty regulations described
below. If the product shows any defects within the speci ed warranty
period that are not excluded from this warranty as described under § 5,
BEHRINGER shall, at its discretion, either replace or repair the product
using suitable new or reconditioned parts. In the case that other parts are
used which constitute an improvement, BEHRINGER may, at its discretion,
charge the customer for the additional cost of these parts.
If the warranty claim proves to be justi ed, the product will be returned to
[2].
the user freight prepaid.
Warranty claims other than those indicated above are expressly excluded.
[3].
Return authorization number§ 4
To obtain warranty service, the buyer (or his authorized dealer) must
[1].
call BEHRINGER during normal business hours BEFORE returning the
product. All inquiries must be accompanied by a description of the problem.
BEHRINGER will then issue a return authorization number.
Subsequently, the product must be returned in its original shipping carton,
[2].
together with the return authorization number to the address indicated by
BEHRINGER.
Shipments without freight prepaid will not be accepted.
[3].
Warranty regulations§ 5
Warranty services will be furnished only if the product is accompanied by a
[1].
copy of the original retail dealer’s invoice. Any product deemed eligible for
repair or replacement under the terms of this warranty will be repaired or
replaced.
If the product needs to be modi ed or adapted in order to comply with appli-
[2].
cable technical or safety standards on a national or local level, in any coun-
try which is not the country for which the product was originally developed
and manufactured, this modi cation/adaptation shall not be considered a
defect in materials or workmanship. The warranty does not cover any such
modi cation/adaptation, irrespective of whether it was carried out properly
or not. Under the terms of this warranty, BEHRINGER shall not be held
responsible for any cost resulting from such a modi cation/adaptation.
Free inspections and maintenance/repair work are expressly excluded from
[3].
this warranty, in particular, if caused by improper handling of the product
by the user. This also applies to defects caused by normal wear and tear, in
particular, of faders, crossfaders, potentiometers, keys/buttons, tubes, guitar
strings, illuminants and similar parts.
Damage/defects caused by the following conditions are not covered by this
[4].
warranty:
improper handling, neglect or failure to operate the unit in compliance
with the instructions given in BEHRINGER user or service manuals;
connection or operation of the unit in any way that does not comply with
the technical or safety regulations applicable in the country where the
product is used;
damage/defects caused by force majeure or any other condition that is
beyond the control of BEHRINGER.
Any repair or opening of the unit carried out by unauthorized personnel
[5].
(user included) will void the warranty.
If an inspection of the product by BEHRINGER shows that the defect in
[6].
question is not covered by the warranty, the inspection costs are payable by
the customer.
Products which do not meet the terms of this warranty will be repaired ex-
[7].
clusively at the buyer’s expense. BEHRINGER will inform the buyer of any
such circumstance. If the buyer fails to submit a written repair order within
6 weeks after noti cation, BEHRINGER will return the unit C.O.D. with
a separate invoice for freight and packing. Such costs will also be invoiced
separately when the buyer has sent in a written repair order.
Warranty transferability§ 6
This warranty is extended exclusively to the original buyer (customer of retail
dealer) and is not transferable to anyone who may subsequently purchase this
product. No other person (retail dealer, etc.) shall be entitled to give any war-
ranty promise on behalf of BEHRINGER.
Claim for damage§ 7
Failure of BEHRINGER to provide proper warranty service shall not entitle
the buyer to claim (consequential) damages. In no event shall the liability of
BEHRINGER exceed the invoiced value of the product.
*
Customers in the European Union please contact BEHRINGER Germany Support for further details.
ENGLISH
This manual is available in English, German, French,
Spanish, Italian, Russian, Polish, Dutch, Finnish, Swedish,
Danish, Portugese, Greek, Japanese and Chinese. There may
also be more current versions of this document. Download them
by going to the appropriate product page at:
www.behringer.com
/