Alto-Shaam EC2-48 Series User manual

Brand
Alto-Shaam
Model
EC2-48 Series
Category
TV stands
Type
User manual
ITEM NO. _______________________
The display case is constructed of 18 gauge, non-magnetic stainless steel. A tempered glass front encloses the display case
and can be lifted to a 90 degree angle for easy cleaning. Removable, sliding glass doors on the operator side are included.
Sliding door tracks have a
“clean sweep” cutout allowing for easy cleaning and crumb removal. Framed end clear glass with
rubber gasket material protects glass edges from chipping and breakage. The base is divided into two (2) individually
managed heat zones with each zone controlled by a separate thermostat with a range of 1 through 10 and heat-on indicator
light. Overhead lights are controlled by ON/OFF switches in two (2) light zones. Two (2) 125V plug outlets are available as
an option on 120/208-240V units only. Counter-top display cases include one set of 4" (102mm) legs.
■■
EC2-48 - 48" (1219mm) length
■■
EC2SYS-48 - 48" (1219mm) length, with base
■■
EC2-48/P - 48" (1219mm) length, 47-5/16" (1202mm) self-service opening across full length of case front
■■
EC2SYS-48/P - 48" (1219mm) length, with base, 47-5/16" (1202mm) self-service opening across full length of case front
●
HALO HEAT … a controlled, uniform heat source that gently
holds and surrounds food for better appearance, taste, and longer
holding life.
●
Holds and displays hot food fresh and moist for hours —
without adding water.
●
Expandable system to meet your specific requirements.
●
Matches profile of leading refrigerated display case.
●
HOT DISPLAY CASE
— Angled flat glass profile provides maximum product visibility.
— Displays hot food without condensation on glass.
— Thermostatically controlled heat source radiates from the
base of the display case in multiple heat zones.
— Overhead light zones with shatterproof coated bulbs.
— Holds a full range of standard (gastronorm) pan sizes, full-size
or half-size sheet pans.
— Tempered sliding glass doors reflect heat back into the products
and mirror the display to enhance merchandising effect.
●
DECORATOR BASE
— Standard black painted front and end panels.
●
SELF-SERVICE HOT DISPLAY
— Customer self-service opening is available across the full length of case.
— Front mounted heat-guard provides customer protection.
ANSI/NSF 4
W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.
PHONE: 262.251.3800 800.558.8744 U.S.A./CANADA FAX: 262.251.7067 800.329.8744 U.S.A. ONLY
www.alto-shaam.com
EC2SYS-48
P R I NT ED IN U.S . A . D U E TO O NG OI NG PR OD UC T D E V E L O PM EN T, S PE CI FI CAT IO NS A R E S UB JE CT T O CH AN GE WI TH OU T N O T I CE . #7 8 - 0 3/ 08
EC2-48 SERIES
EC2SYS-48 SERIES
HEATED DISPLAY SYSTEMS
EC2-48
FACTORY INSTALLED OPTIONS
● The system base is not sold as a separate
item. Order the full EC2SYS model to
receive the base.
● Panel Color Choices
➥Specify color choice:
■■
Black, standard
■■
Stainless Steel, optional
■■
Custom Color, optional
W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.
PHONE: 262.251.3800 800.558.8744 U.S.A./CANADA FAX: 262.251.7067 800.329.8744 U.S.A. ONLY
www.alto-shaam.com
O P T I O N S & A C C E S S O R I E S
■■
BUTTING KIT CONTACT FACTORY
■■
GAUGE, INTERIOR AMBIENT TEMP. GU-33384
■■
GLASS, NON-GLARE, FRONT GL-24256
■■
GLASS, TEMPERED END PANE, BRONZE KIT 5008528
■■
INDEPENDENT ELECTRICAL OUTLET 5001781
PANEL KIT, COUNTER TOP
■■
BRUSHED STAINLESS STEEL 5004694
■■
CUSTOM COLOR 5004700
PANEL KIT, SYSTEM
■■
BRUSHED STAINLESS STEEL 5004697
■■
CUSTOM COLOR 5004703
■■
PAN INSERT, SELF-SERVICE 4" (102mm) DEEP 1001990
■■
PLATFORM SCALE 55265
■■
SHEET PAN DIVIDER BAR PACKAGE 5002802
■■
TEMPERATURE PROBE 5004916
■■
THERMOSTAT GUARD COVER PLATE 5007660
■■
WORK SHELF WITH GRAVY LANE 5005638
#7 8 - 0 3/ 08 D U E TO O NG OI NG PR OD UC T D E V E L O PM EN T, S PE CI FI CAT IO NS A R E S UB JE CT T O CH AN GE WI TH OU T N O T I CE . P R I NT ED IN U.S . A .
EC2-48 SERIES
EC2SYS-48 SERIES
HEATED DIS PLAY SYST EMS
D I M E N S I O N S (HXWXD)
EXTERIOR, COUNTER-TOP MODEL WITH LEGS:
37-11/16" x 48" x 53-1/2" (956mm x 1219mm x 1358mm)
EXTERIOR,
WITH BASE:
48" x 48" x 53-1/2" (1219mm x 1219mm x 1358mm)
WELL DIMENSIONS (WXLXD):
27-3/16" x 45-5/16" x 4-1/2" (690mm x 1151mm x 114mm)
ELECTRICAL
CORD
9
6" (2438mm)
CUTTING BOARD IN “DOWN” POSITION CUTTING BOARD IN “DOWN” POSITION
6-3/4"
(172mm)
ON
OFF
ON
OFF
ON
OFF
48" (1218mm)
72" (1829mm)
CUTTING BOARD IN “DOWN” POSITION
ON
OFF
ON
OFF
48" (1218mm)
ELECTRICAL
CORD
6-3/4"
(
172mm)
53-1/2" (1358mm)
43-3/4" (1111mm)
13-9/16"
(344mm)
37-11
/16" (956mm)
2
3
-
7
/
8
"
(
6
0
6
m
m
)
48"
(1218m
m
)
10-11/16"
(270mm)
4
1-7/8" (1063mm)
5
3-1/2" (1358mm)
4
3-3/4" (1111mm)
4
8" (1219mm)
CUTTING BOARD IN “DOWN” POSITION
ON
OFF
ON
OFF
48" (1218mm)
ELECTRICAL
CORD
6-3/4"
(172mm)
E
LECTRICAL
CORD
96" (2438mm)
CUTTING BOARD IN “DOWN” POSITION CUTTING BOARD IN “DOWN” POSITION
6-3/4"
(172mm)
ON
OFF
ON
OFF
ON
OFF
48" (1218mm)
72" (1829mm)
CUTTING BOARD IN “DOWN” POSITION
ON
OFF
ON
OFF
48" (1218mm)
ELECTRICAL
CORD
6-3/4"
(172mm)
53-1/2" (1358mm)
43-3/4" (1111mm)
13-9/16"
(344mm)
37-11
/16" (956mm)
23-7/
8"
(606m
m
)
48"
(1218m
m
)
10-11/16"
(270mm)
41-7/8" (1063mm)
5
3-1/2" (1358mm)
43-3/4" (1111mm)
4
8" (1219mm)
CUTTING BOARD IN “DOWN” POSITION
ON
OFF
ON
OFF
48" (1218mm)
ELECTRICAL
CORD
6-3/4"
(
172mm)
ELECTRICAL
CORD
9
6" (2438mm)
C
UTTING BOARD IN “DOWN” POSITION CUTTING BOARD IN “DOWN” POSITION
6-3/4"
(
172mm)
O
N
OFF
O
N
OFF
O
N
OFF
48" (1218mm)
72" (1829mm)
C
UTTING BOARD IN “DOWN” POSITION
ON
OFF
ON
OFF
48" (1218mm)
ELECTRICAL
CORD
6-3/4"
(172mm)
53-1/2" (1358mm)
4
3-3/4" (1111mm)
13-9/16"
(344mm)
37-11
/16" (956mm)
23-7/
8"
(606m
m
)
48" (1218mm
)
10-11/16"
(270mm)
4
1-7/8" (1063mm)
53-1/2" (1358mm)
4
3-3/4" (1111mm)
4
8" (1219mm)
C
UTTING BOARD IN “DOWN” POSITION
ON
OFF
ON
OFF
48" (1218mm)
ELECTRICAL
CORD
6-3/4"
(172mm)
EC2SYS-48
EC2SYS Profile
EC2 Profile
I N S TA L L AT I O N R E Q U I R E M E N T S
Display case must be installed level. The display case must
not be installed in any area where it may be affected by steam,
grease, dripping water, high temperatures, or any other
severely adverse conditions.
Do not install a heated display case near a cold air source such
as a freezer, air conditioning vents, or in any area where
outside air fluctuation can affect performance.
W E I G H T
MODEL NET SHIP
EC2-48 305 lb (138 kg) 380 lb (172 kg)
EC2SYS-48 350 lb (159 kg) 425 lb (193 kg)
EC2-48/P 305 lb (138 kg) 380 lb (172 kg)
EC2SYS-48/P 350 lb (159 kg) 425 lb (193 kg)
CRATED DIMENSIONS (EST.): HXWXD
EC2-48: 45" x 60" x 55" (1143mm x 1524mm x 1397mm)
EC2SYS-48: 60" x 60" x 66" (1524mm x 1524mm x 1676mm)
E L E C T R I C A L
V
OLTAGE PHASE CYCLE
/H
Z AMPS
kW
1
20/
208-240 (U
L
)1 5
0/60
13.8 3.3
at 208 1 50/60 11.6 2.5
at 240 1 50/60 13.0 3.1
230
(CE) 1 50/60 12.6 2.9
230 1 50/60 12.6 2.9
Tyler Huss.eps
revised 5/30/02
a
dded L14-20P Plug Configuration
NEMA L14-20P
20A, 250V PLUG
BARE END
, NO PLUG
PA N C O N F I G U R AT I O N *
PAN SIZE DIMENSIONS QTY.
FULL-SIZE & ONE-THIRD**: 12" X 20" X 2-1/2" (GN 1/1) 3
12" X 6" X 2-1/2" (GN 1/3) 3
H
ALF
-S
IZE
& O
NE
-T
HIRD
**: 12" X 10" X 2-1/2" (G
N
1/2) 6
12" X 6" X 2-1/2" (GN 1/3) 3
FULL-SIZE SHEET PANS: 18" X 26" X 1" 2
MAX. CAPACITY/VOLUME: 48 lbs (22 kg)
30 qts (36 L)
* Pans are not included with display case.
** Will also accept 4" (100mm) deep pans.
S P E C I F I C AT I O N S
●
Six (6) overhead lights with two (2) light zones.
●
Two (2) base heat zones with two (2) adjustable thermostats with
a range of 1 through 10, and two (2) heat-on indicator lights.
●
Two (2) tinted, reflective, tempered glass sliding doors on
operator side.
●
One (1) 10" x 36" (254mm x 914mm) operator-side work shelf.
●
Self-serve model EC2-48/P has a self-serve pan insert
26-7/16" x 45-3/16" x 2" (672mm x 1148mm x 51mm) and
includes two (2) Wire Pan Grids.
  • Page 1 1
  • Page 2 2

Alto-Shaam EC2-48 Series User manual

Brand
Alto-Shaam
Model
EC2-48 Series
Category
TV stands
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents