American Standard 7191 Series User manual

Brand: American Standard

Model: 7191 Series

Category: Sanitary ware

Type: User manual

This manual is also suitable for

Single Hole Bar/Pantry Faucet with Swing Spout 7191 Series

American Standard 7191 Series is a single-hole bar/pantry faucet with a swing spout, available in various finishes, including Polished Chrome, Satin Nickel, Stainless Steel, Polished Brass, or a combination of these finishes. It features the EverClean finish, which is a permanent surface protectant that repels water spots and stains, making it easy to clean with just one wipe. The faucet is certified to comply with ANSI A112.18.1M standards and comes with a 5,819,789 U.S. patent.

Installation

Instructions

3&7

7190 SERIES

7100 SERIES

(7100 SERIES NOT

AVAILABLE WITH

EverClean Finish)

Certiﬁed to comply with ANSI A112.18.1M

U.S. Patent No. 5,819,789

MODEL 7190 MODEL 7100

012087-0070A

SPOUT SEAL KIT

012087-0070A

SPOUT SEAL KIT

A911758-0070A

RUBBER RING

012671-0070

RUBBER RING

M961714-0070A

MOUNTING KIT

028611-0070A

HANDLE SCREW

028611-0070A

HANDLE SCREW

028610-0070A

CARTRIDGE

028610-0070A

CARTRIDGE

012088-YYY0A

SWING SPOUT KIT

066108-YYY0A

AERATOR

012088-YYY0A

SWING SPOUT KIT

066108-YYY0A

AERATOR

024220-0070A

SUPPLY NUT

030741-0070A

CARTRIDGE SEAL

KIT

012094-0070A

MOUNTING KIT

HOT LINE FOR HELP

For toll-free information and answers to your questions, call:

1 (800) 442-1902

Weekdays 8:00 a.m. to 8:00 p.m. EST

IN CANADA 1-800-387-0369 (TORONTO 1-905-306-1093)

Weekdays 8:00 a.m. to 7:00 p.m. EST

Product names listed herein are trademarks of American Standard Inc.

IN MEXICO 01-800-839-12-00

SINGLE-HOLE BAR/PANTRY

FAUCET WITH SWING SPOUT

with EverClean™ Finish

Congratulations on purchasing your American Standard faucet with

EverClean nish found only on American Standard faucets.

To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin.

EverClean Finish

• One wipe eortlessly removes spots

• Eliminates the need for cleaners and scrubbing

• Permanent surface protectant remains beautiful

for the life of the faucet

• EverClean™ available on: Polished Chrome, Satin Nickel,

Stainless Steel, Polished Brass (or any combination of these nishes)

CHROME

POL. BRASS

SATIN NICKEL

SATIN/BRASS

CHROME/POL. BRASS

002

099

295

297

299

Replace the "YYY" with

appropriate ﬁnish code

CHROME

WHITE

BONE

POL. BRASS

002

020

021

099

Replace the "YYY" with

appropriate ﬁnish code

FLEXIBLE

INLET HOSES

HOT

COLD

RECESS

3&7





TEST INSTALLED FAUCET



SWING SPOUT ASSEMBLY

FITTING INSTALLATION

For Model 7190 Only

Connect hot or cold water supply lines to shank using

sealant, appropriate connectors, and coupling nuts.

For Model 7100 Only

SHANK

MODEL 7190 MODEL 7100

SUPPLY

NUT

RECESS

EverClean™ Finish Care Instructions

American Standard’s EverClean ﬁnish will wipe clean with a soft, dry cloth. A soft cloth with

clean water may also be used, if desired. No additional cleaning products are required.

DO NOT USE: Soaps, acid, polish, abrasives, harsh cleaners, or a cloth with a coarse surface.

SERVICE



Turn off hot and cold water

supplies before beginning.

CAUTION



Apply the grease (provided) liberally to the

SPOUT O-RING (1) and SNAP RING (2) areas.

Assemble the SPOUT (3) and tighten the

SPOUT NUT

(4) until snug on VALVE BODY.

Remove AERATOR.

With handle in OFF position, turn on water supplies

and check all connections for leaks.

Operate both handles to ﬂush water lines thoroughly.

Checkspout mounting and hose connections for leaks.

Turn handles into OFF position and replace AERATOR.

To change direction of handle rotation,

proceed as follows:

Turn valve to OFF position.

Remove INSERT and HANDLE SCREW.

Slip HANDLE with ADAPTER off.

Remove SPRING CLIP (1).

Lift STOP WASHER (2), turn 90p and replace.

Replace SPRING CLIP (1).

Replace ADAPTER, HANDLE, SCREW, and INSERT.

AERATOR may accumulate dirt causing distorted and reduced

water ﬂow. Remove AERATOR and rinse clean.

If spout drips, operate handles several times from OFF to ON

position. Do not force - handles turn only 90p.

Plastic SCREEN (3) in CARTRIDGE (4) may accumulate

dirt causing reduced water ﬂow. To clean, ﬁrst turn

off hot and cold water supplies, then:

Remove INSERT and HANDLE SCREW.

Slip HANDLE with ADAPTER off.

Unscrew CARTRIDGE (4) with wrench.

Thoroughly rinse plastic SCREEN (3) at

base of CARTRIDGE (4).

Replace CARTRIDGE (4) until ﬂange is

tight against valve body.

Turn valves OFF.

Replace ADAPTER, HANDLE, SCREW,

and INSERT.

90p

Place RUBBER RING (4) in recess of ﬁtting.

Insert inlet hoses (on model 7190 only) and

THREADED SHANK through hole of sink making

certain RUBBER RING

(4) is properly seated in the

recess of the ﬁtting base.

Assemble GASKET (3), BRASS WASHER (2), and

LOCKNUT

(1) onto the THREADED SHANK from

underside of sink deck.

Tighten the LOCKNUT (1) securely.

Connect the hot water supply to the left inlet hose

and the cold water supply to the right inlet hose

using appropriate connectors.

Remove LOCKNUT (1), BRASS WASHER (2), and

GASKET

(3) from ﬁtting.

American Standard 7191 Series User manual

Brand: American Standard

Model: 7191 Series

Category: Sanitary ware

Type: User manual

This manual is also suitable for

Single Hole Bar/Pantry Faucet with Swing Spout 7191 Series

Download PDF

report

American Standard 7191 Series User manual

This manual is also suitable for

American Standard 7191 Series User manual

Related papers

Other documents