Kingston Technology KHX5400D2/512 Datasheet

Kingston Technology
Brand
Kingston Technology
Model
KHX5400D2/512
Category
Memory modules
Type
Datasheet

Kingston Technology KHX5400D2/512 is a memory module designed to enhance the performance of your computer system. With its 512MB capacity and DDR2-675 technology, this module provides fast and efficient data transfer speeds to support demanding applications and multitasking.

The CL4 latency of the KHX5400D2/512 ensures quick response times, minimizing delays in data access. Additionally, the double-data-rate architecture allows for two data transfers per clock cycle, further enhancing the module's performance.

The KHX5400D2/512 is also equipped with a high-performance heat spreader, which helps dissipate heat and maintain optimal operating temperatures. This feature is crucial for ensuring stability and longevity, especially during extended periods of intensive use.

Kingston Technology KHX5400D2/512 is a memory module designed to enhance the performance of your computer system. With its 512MB capacity and DDR2-675 technology, this module provides fast and efficient data transfer speeds to support demanding applications and multitasking.

The CL4 latency of the KHX5400D2/512 ensures quick response times, minimizing delays in data access. Additionally, the double-data-rate architecture allows for two data transfers per clock cycle, further enhancing the module's performance.

The KHX5400D2/512 is also equipped with a high-performance heat spreader, which helps dissipate heat and maintain optimal operating temperatures. This feature is crucial for ensuring stability and longevity, especially during extended periods of intensive use.

Memory Module Specification
Document No. 4804025-001.A00
08/11/04
KHX5400D2/512
512MB 64M x 64-Bit PC2-5400
CL4 240-Pin DIMM
KEYED
Page 1
DESCRIPTION:
This document describes Kingston's 64M x 64-bit (512MB) DDR2-675 CL4 SDRAM (Synchronous
DRAM) memory module, based on eight 64M x 8-bit DDR2 FBGA components. This module has
been tested to run at DDR2 675MHz at low latency timing of 4-4-4-10 at 1.85V. The SPD is
programmed to JEDEC standard latency timing of 4-4-4-12 at 1.8V. This 240-pin DIMM uses gold
contact fingers and requires +1.8V. The electrical and mechanical specifications are as follows:
FEATURES:
Power supply : Vdd: 1.8V ± 0.1V, Vddq: 1.8V ± 0.1V
Double-data-rate architecture; two data transfers per clock cycle
Bidirectional data strobe(DQS)
Differential clock inputs(CK and CK)
DLL aligns DQ and DQS transition with CK transition
Programmable Read latency 4 (clock)
Burst Length: 4, 8 (Interleave/nibble sequential)
Programmable Burst type (sequential & interleave)
Timing Reference: 4-4-4-10 at +1.85V
Edge aligned data output, center aligned data input
Auto & Self refresh, 7.8us refresh interval (8K/64ms refresh)
Serial presence detect with EEPROM
High Performance Heat Spreader
PCB : Height 1.180” (30.00mm), single sided component
PERFORMANCE:
Clock Cycle Time (tCK) CL=4 3.75ns (min.) / 8ns (max.)
Row Cycle Time (tRC) 60ns (min.)
Refresh to Active/Refresh Command Time (tRFC) 105ns
Row Active Time (tRAS) 45ns (min.) / 70,000ns (max.)
Single Power Supply of +1.8V (+/- .1V)
Power 1.512 W (operating)
UL Rating 94 V - 0
Operating Temperature 0
o
C to 55
o
C
Storage Temperature -55
o
C to +125
o
C
TECHNOLOGY
Kingston Technology
Document No. 4804025-001.A00 Page 2
MODULE DIMENSIONS:
131.35
Units : Millimeters
133.35
10.00
1.270 ± 0.10
2.7
SPD
128.95
(2)
2.50
(2X)4.00
30.00
2.30
17.80
A
B
63.00
55.00
2.50
1.00
0.20
2.50±0.20
Detail B
5.00
Detail A
4.00
1.50±0.10
0.80±0.05
4.00
3.80
3.00
4.00
All Kingston products are tested to meet our published specifications. Some motherboards or system configurations may not
operate at the published HyperX memory speeds and timing settings. Kingston does not recommend that any user attempt to
run their computers faster than the published speed. Overclocking or modifying your system timing may result in damage to
computer components.
For more information, go to www.kingston.com
  • Page 1 1
  • Page 2 2

Kingston Technology KHX5400D2/512 Datasheet

Kingston Technology
Brand
Kingston Technology
Model
KHX5400D2/512
Category
Memory modules
Type
Datasheet

Kingston Technology KHX5400D2/512 is a memory module designed to enhance the performance of your computer system. With its 512MB capacity and DDR2-675 technology, this module provides fast and efficient data transfer speeds to support demanding applications and multitasking.

The CL4 latency of the KHX5400D2/512 ensures quick response times, minimizing delays in data access. Additionally, the double-data-rate architecture allows for two data transfers per clock cycle, further enhancing the module's performance.

The KHX5400D2/512 is also equipped with a high-performance heat spreader, which helps dissipate heat and maintain optimal operating temperatures. This feature is crucial for ensuring stability and longevity, especially during extended periods of intensive use.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents