Strong SR-WM-DOOR-16U-PLEXI Owner's manual

Category
Rack accessories
Type
Owner's manual

This manual is also suitable for

ASSEMBLY MANUAL
SR-WM-DOOR-10U SR-WM-DOOR-12U SR-WM-DOOR-16U
SR SERIES WALL MOUNT RACK DOORS
OVERVIEW
The SR-WM-DOOR-10U / 12U / 16U is constructed with the same rigid materials as the Strong™ SR Series wall mount racks, and
provides security, as well as a nished look, to any installation.
NOTE: SR-WM-10U / 12U / 16U are to be built separately following the SR-WM installation manual.
PARTS INCLUDED
A. (1) SR-DOOR Rack Door
B. (1) Key Lock – Already Installed
C. (2) Hinge Bushings
ATTACHING THE DOOR
1. Install the Hinge Bushing into the top and bottom plates of the Wall Mount rack.
2. Pull the hinges towards the top of the door.
3. Slide the door into place over the hinge bushings and release the hinges.
For Technical Support : 1.866.838.5052
© 2012 STRONG
120126
C
A
B
Wall Mount Rack
NOT INCLUDED
  • Page 1 1

Strong SR-WM-DOOR-16U-PLEXI Owner's manual

Category
Rack accessories
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI