Ignition WAL-L710 Par W-DMX Owner's manual

WAL-L310 Par,

WAL-L710 Par,

WAL-L710 Par W-DMX

LED PAR

User manual

Musikhaus Thomann

Thomann GmbH

Hans-Thomann-Straße 1

96138 Burgebrach

Germany

Telephone: +49 (0) 9546 9223-0

E-mail: [email protected]

Internet: www.thomann.de

02.11.2020, ID: 474388 (SW V2.0), 474390 (SW V2.0), 477173 (SW V2.6) - document V2

Table of contents

1 General information................................................................................................................................. 6

1.1 Further information........................................................................................................................... 7

1.2 Notational conventions.................................................................................................................... 8

1.3 Symbols and signal words............................................................................................................... 9

2 Safety instructions.................................................................................................................................. 12

3 Features....................................................................................................................................................... 18

4 Installation.................................................................................................................................................. 20

5 Starting up.................................................................................................................................................. 24

6 Connections and controls................................................................................................................... 27

7 Operating.................................................................................................................................................... 33

7.1 Starting the device........................................................................................................................... 33

7.2 Operating on the unit..................................................................................................................... 33

7.3 Menu overview................................................................................................................................. 57

7.4 Functions in 4-channel DMX mode........................................................................................... 58

7.5 Functions in 6-channel DMX mode........................................................................................... 59

Table of contents

WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX

3

LED PAR

7.6 Functions in 9-channel DMX mode........................................................................................... 60

8 Technical specications....................................................................................................................... 66

9 Plug and connection assignment.................................................................................................... 72

10 Troubleshooting...................................................................................................................................... 73

11 Cleaning....................................................................................................................................................... 75

12 Protecting the environment.............................................................................................................. 76

Table of contents

4

WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX

LED PAR

WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX

5

LED PAR

1 General information

This user manual contains important information on the safe operation of the device. Read and

follow all safety notes and all instructions. Save this manual for future reference. Make sure

that it is available to all persons using this device. If you sell the device to another user, be sure

that they also receive this manual.

Our products and user manuals are subject to a process of continuous development. We there‐

fore reserve the right to make changes without notice. Please refer to the latest version of the

user manual which is ready for download under www.thomann.de.

General information

6

WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX

LED PAR

1.1 Further information

On our website (www.thomann.de) you will nd lots of further information and details on the

following points:

Download This manual is also available as PDF le for you to download.

Keyword search

Use the search function in the electronic version to nd the topics of

interest for you quickly.

Online guides

Our online guides provide detailed information on technical basics

and terms.

Personal consultation For personal consultation please contact our technical hotline.

Service

If you have any problems with the device the customer service will

gladly assist you.

General information

WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX

7

LED PAR

1.2 Notational conventions

This manual uses the following notational conventions:

The letterings for connectors and controls are marked by square brackets and italics.

Examples: [VOLUME] control, [Mono] button.

Texts and values displayed on the device are marked by quotation marks and italics.

Examples: ‘24ch’ , ‘OFF’ .

Letterings

Displays

General information

8

WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX

LED PAR

The individual steps of an instruction are numbered consecutively. The result of a step is

indented and highlighted by an arrow.

Example:

1. Switch on the device.

2. Press [Auto].

ð

Automatic operation is started.

3. Switch o the device.

1.3 Symbols and signal words

In this section you will nd an overview of the meaning of symbols and signal words that are

used in this manual.

Instructions

General information

WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX

9

LED PAR

Signal word Meaning

DANGER! This combination of symbol and signal word indicates an

immediate dangerous situation that will result in death or

serious injury if it is not avoided.

WARNING! This combination of symbol and signal word indicates a pos‐

sible dangerous situation that can result in death or serious

injury if it is not avoided.

NOTICE! This combination of symbol and signal word indicates a pos‐

sible dangerous situation that can result in material and

environmental damage if it is not avoided.

Warning signs Type of danger

Warning – high-voltage.

Warning – hot surface.

General information

10

WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX

LED PAR

Warning signs Type of danger

Warning – dangerous optical radiation.

Warning – suspended load.

Warning – danger zone.

General information

WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX

11

LED PAR

2 Safety instructions

This device is intended for use as an electronic lighting eect by means of LED technology. The

device is designed for professional use and is not suitable for use in households. Use the

device only as described in this user manual. Any other use or use under other operating con‐

ditions is considered to be improper and may result in personal injury or property damage. No

liability will be assumed for damages resulting from improper use.

This device may be used only by persons with sucient physical, sensorial, and intellectual

abilities and having corresponding knowledge and experience. Other persons may use this

device only if they are supervised or instructed by a person who is responsible for their safety.

Extend the life of the device by regular breaks in operation and avoid switching it on and o

frequently. This device is not suitable for continuous use.

Intended use

Safety instructions

12

WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX

LED PAR

DANGER!

Danger for children

Ensure that plastic bags, packaging, etc. are disposed of properly and are not

within reach of babies and young children. Choking hazard!

Ensure that children do not detach any small parts (e.g. knobs or the like) from

the unit. They could swallow the pieces and choke!

Never let children unattended use electrical devices.

DANGER!

Electric shock caused by short-circuit

Always use proper ready-made insulated mains cabling (power cord). Do not

modify the mains cable. Failure to do so could result in electric shock/death or

re. If in doubt, seek advice from a registered electrician.

Safety

Safety instructions

WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX

13

LED PAR

DANGER!

Electric shock caused by short-circuit

Do not modify the mains cable or the plug. Failure to do so could result in electric

shock/death or re. If in doubt, seek advice from a registered electrician.

DANGER!

Electric shock caused by high voltages inside

Within the device there are areas where high voltages may be present. Never

remove any covers.

There are no user-serviceable parts inside.

Do not use the device if covers, protectors or optical components are missing or

damaged.

Safety instructions

14

WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX

LED PAR

WARNING!

Eye damage caused by high light intensity

Never look directly into the light source.

WARNING!

Risk of epileptic shock

Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons

should avoid looking at strobe lights.

WARNING!

Risk of burns

The surface of the device can become very hot during operation.

Do not touch the device with bare hands during operation, and after switching

o wait for at least 15 minutes.

Safety instructions

WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX

15

LED PAR

NOTICE!

Risk of re

Do not block areas of ventilation. Do not install the device near any direct heat

source. Keep the device away from naked ames.

NOTICE!

Power supply

Before connecting the device, ensure that the input voltage (AC outlet) matches

the voltage rating of the device and that the AC outlet is protected by a residual

current circuit breaker. Failure to do so could result in damage to the device and

possibly injure the user.

Unplug the device before electrical storms occur and when it is unused for long

periods of time to reduce the risk of electric shock or re.

Safety instructions

16

WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX

LED PAR

NOTICE!

Fire hazard due to exceedance of the maximum current

The device can power other devices. The current consumption of all serially con‐

nected other devices must not exceed the values indicated in the technical speci‐

cations, otherwise you risk injuries and irreparable damages of the device.

Connect just so many devices to the output socket that the maximum current

consumption is not exceeded.

Ensure the correct dimensioning (wire cross section) of the used power cords of

all serially connected devices.

Safety instructions

WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX

17

LED PAR

3 Features

Splashproof LED PAR, ideal for atmosphere illumination for outdoor use, for illumination of

buildings and stages.

Special features of the device:

n item number 474388: 3 × 4in1 LEDs (RGBW, 10 W each)

n Item number 474390 and 477173: 7 × 4in1 LEDs (RGBW, 10 W each)

n Control via DMX, via RDM as well as via buttons and display on the unit

n Built-in automatic show programmes

n Customized shows

n Master / Slave operation

n Protection class IP65

n Sturdy double bracket for secure attachment to trusses or rm footing on the ground

n Omega bracket with Quick-Lock fastener

Ignition WAL-L710 Par W-DMX (item no. 477173) in addition:

n Built-in wireless solution receiver module (G5) for wireless control

n Barn door, diusion lter 25° and diusion lter 40° optionally available

Features

18

WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX

LED PAR

The device supports RDM protocol communication (Remote Device Management) according

to ANSI / ESTA E1.20. It can exchange information with an RDM-compatible controller. Also

observe the instruction manual of the controller.

Equipment with protection class IP65 are dust-tight and completely protected against contact

(rst code number). They are also protected against splash water from any angle (second code

digit). That is why this equipment can also be used outdoors. Event technology equipment is

generally only designed for temporary use however (event lighting) and not for permanent

use outdoors.

The specied protection class does not make a statement about the weather resistance of the

equipment (resistance to changing ambient conditions as well as against the eects of sun‐

light and UV rays).

The seals and screw connections of the equipment must be checked regularly to ensure a

fault-free operation. In cases of doubt, consult a specialist workshop in due time.

For technological reasons, the light output of LEDs decreases over their lifetime. This eect

increases with higher operating temperature. You can extend the service life of the illuminants

by providing adequate ventilation and operating the LEDs with the lowest possible brightness.

Remote Device Management

(RDM)

Information about protection

class IP65

Features

WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX

19

LED PAR

4 Installation

Unpack and check carefully there is no transportation damage before using the unit. Keep the

equipment packaging. To fully protect the product against vibration, dust and moisture during

transportation or storage use the original packaging or your own packaging material suitable

for transport or storage, respectively.

WARNING!

Risk of injury caused by falling objects

Make sure that the installation complies with the standards and rules that apply

in your country. Always secure the device with a secondary safety attachment,

such as a safety cable or a safety chain.

Installation

20

WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX

LED PAR

Page is loading ...

Ignition WAL-L710 Par W-DMX Owner's manual

This manual is also suitable for

Ignition WAL-L710 Par W-DMX Owner's manual

Related papers

Other documents